EN-Labs SATA24BK SATA III cable 24 inch latching
24-inch SATA III data cable with locking latch supports 6.0 Gbps and fits 26 AWG tinned copper conductors
- Cable length24 in (61 cm)
- Connector count2
- Connector details1 x SATA to 1 x SATA
- Connector genderFemale to Female
- Conductor typeCopper Conductor
- Product typeSATA III
- Secure latch keeps the cable seated during moves
- 24-inch length fits most internal drive bays
- 0 Gbps SATA III bandwidth for fast transfers
- 26 AWG tinned copper conductors reduce signal loss
- UL listed and RoHS compliant for safety
Product identity
The EN-Labs SATA24BK is a 24-inch SATA III data cable with latching connectors. It links hard drives or solid-state drives to motherboards and host controllers inside a desktop or server chassis. The locking latch keeps each plug seated in tight spaces where vibration or cable routing might otherwise loosen the connection.
Deciding specification
The cable uses 7-pin SATA 180-degree latching receptacles rated for SATA revision III up to 6.0 Gbps. It is backwards compatible with SATA I and II ports, so the same lead works across multiple drive generations. Shielded 26 AWG tinned copper conductors and UL-listed, RoHS-compliant construction complete the core specification.
Capacity and headroom
At 6.0 Gbps the link handles current mechanical hard drives and mainstream SATA SSDs without bottleneck. Actual throughput is limited by the attached drive and controller rather than the cable itself. The 24-inch length suits typical mid-tower layouts but may fall short in full-tower or external enclosure builds where longer runs are required.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | SATA24BK |
| Product type | SATA III |
| Design style | Straight |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 21 in - 25 in |
| Cable length | 24 in (61 cm) |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
Questions about this item
What does the 6.0 Gbps rating mean once the cable is installed?
The cable supports SATA revision III up to 6 Gbps, but actual throughput is limited by the drive and controller you connect.
Which interface standard does the cable use and what does it cap in practice?
It uses the SATA III interface with 7-pin 180-degree latching connectors, capped at 6 Gbps by the specification.
What does the cable need to fit or mount inside a case?
Two 7-pin SATA ports spaced for a 24-inch straight run; the latching receptacles lock onto standard drive and motherboard headers.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 4-Pin LP4 to Left Angle SATA Power Adapter Cable 6 Inches
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors 12" SATA III Straight Cable with Locking Latch Black 3-Pack
- Black
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors SATA III 20" 90° to 90° Cable with Locking Latch Black 3-Pack
- Black





