EN-Labs SATA24UVBL SATA cable 24 inch UV Blue
A 24-inch SATA III cable with locking 180-degree connectors supports 6.0 Gbps data transfer
- Cable length24 in (61 cm)
- Connector count2
- Connector details1 x SATA to 1 x SATA
- Connector genderFemale to Female
- Conductor typeCopper Conductor
- Product typeSATA III
- 6 Gbps transfer speed supported
- 24 inch length fits most builds
- Latching connectors prevent accidental disconnects
- 26AWG tinned copper conductors with shielding
- Backwards compatible with SATA I and II
24-inch SATA III cable
The EN-Labs SATA24UVBL is a 24-inch SATA III data cable designed for internal drive connections. It links SATA III, II or I hard drives and SSDs to motherboards or host controllers. The UV blue jacket aids cable identification inside a case.
Straight latching connectors
Each end carries a 7-pin 180-degree straight receptacle with a latch that secures the connection in tight spaces. Shielded 26 AWG tinned copper conductors support the SATA 6 Gbps specification while remaining backwards compatible. The cable fits standard drive bays and motherboard headers without adapters.
6 Gbps headroom
The link operates at up to 6 Gbps when both drive and controller support SATA III, and falls back to lower revisions automatically. Actual throughput is limited by the attached equipment, so legacy ports will run at their rated speeds. One cable handles a single drive; additional drives require extra cables.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 85% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | SATA24UVBL |
| Product type | SATA III |
| Design style | Straight |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 21 in - 25 in |
| Cable length | 24 in (61 cm) |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
Questions about this item
What maximum data rate does this 24 inch SATA III cable support?
The cable supports SATA revision III up to 6.0 Gbps, though actual speed is limited by the connected drive and host controller.
Does the latch on the 7-pin connectors add noticeable heat or noise during continuous use?
No, the latching connectors are passive mechanical parts and add no heat or noise during all-day operation.
Which devices must already be in the system for this 24 inch cable to function?
You need a motherboard or host controller with a 7-pin SATA port and a drive with a matching 7-pin SATA interface.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12 Inches 15-pin SATA Male to Female Power Extension Cable
- 1 ft (0.3 m)
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III straight to right-angle cable 20" black 3-pack
- Black





