EN-Labs SATA24UVBL90 24" 90° to 180° SATA cable UV Blue
A 24-inch SATA cable with a 90-degree to 180-degree angled connector and latch for secure internal drive connections
- Cable length24 in (61 cm)
- Connector count2
- Connector details1 x SATA to 1 x SATA
- Connector genderFemale to Female
- Conductor typeCopper Conductor
- Product typeSATA III
- Secure latch on straight connector prevents accidental disconnection
- 90° to 180° angle simplifies routing in tight cases
- 24-inch length suits standard drive-to-motherboard runs
- 0 Gbps SATA III support with SATA I/II backward compatibility
- UL-listed and RoHS-compliant with 26AWG tinned copper conductors
Cable layout and use
The EN-Labs SATA24UVBL90 is a 24 inch SATA III data cable with one 90 degree connector and one 180 degree connector. It links a hard drive or solid-state drive to a motherboard or host controller in builds where the drive sits close to the board edge or behind other cards. The latch on the straight end secures the connection in tight spaces.
Shielding and signal quality
A copper conductor and 26AWG gauge carry the signal, while shielding helps reject interference inside a crowded case. The design supports SATA revision III up to 6.0 Gbps and remains backwards compatible with SATA I and II ports. UL listing and RoHS compliance confirm the materials meet recognised safety and environmental standards.
Sustained transfer behaviour
Under continuous read or write workloads the cable maintains the rated link speed as long as the attached drive and controller can sustain it. The fixed 24 inch length limits routing options in larger chassis, and the single-angle layout may not suit drives mounted at unconventional angles. Actual throughput is always bounded by the slowest device in the chain.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | SATA24UVBL90 |
| Product type | SATA III |
| Design style | 1 Angle |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 21 in - 25 in |
| Cable length | 24 in (61 cm) |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
Questions about this item
How do I install the 90-degree-to-180-degree SATA cable and which connector orientation is commonly confused?
Route the 90-degree plug to the drive in tight bays and the 180-degree plug to the motherboard; the latch on the straight end clicks only when fully seated.
What maintenance or replacement will this 24-inch SATA III cable need over time?
No scheduled maintenance; replace only if the latch breaks or the 26AWG conductors show damage from repeated flexing.
What limit appears first on this shielded copper cable during sustained 6.0 Gbps transfers?
The practical ceiling is the 6.0 Gbps SATA III rating; actual throughput cannot exceed the slowest connected device.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 4-Pin LP4 to Left Angle SATA Power Adapter Cable 6 Inches
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12" SATA III Straight Cable with Locking Latch Black 3-Pack
- Black
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III 20" 90° to 90° Cable with Locking Latch Black 3-Pack
- Black





