EN-Labs SATA3-LEFT30CM SATA III cable left 90° to 180° latch red 1.64ft
A left-angled 90° to 180° SATA III cable with latch locking, 1.64 ft long, using 26 AWG tinned copper conductors for up to 6.0 Gbps transfers
- Cable length1 ft (0.3 m)
- Connector count2
- Connector details1 x SATA to 1 x SATA
- Connector genderFemale to Female
- Conductor typeCopper Conductor
- Product typeSATA III
- Left-angled 90° to 180° connector fits tight drive bays
- Latching straight connector prevents accidental disconnection during vibration
- 26 AWG tinned copper conductors deliver 6.0 Gbps SATA III throughput
- 64 ft length reaches drives without excess cable slack
- Backwards compatible with SATA I and II host ports
SATA III left-angled cable for tight builds
This EN-Labs SATA III cable has a left-side 90-degree connector that turns toward a straight 180-degree latch connector. The 1.64ft length fits compact cases and drive cages where straight plugs would foul neighbouring components. It supports 6.0Gbps transfer rates and remains backwards compatible with earlier SATA ports.
Shielded copper conductors sustain rated speed
26AWG tinned copper conductors with full shielding keep signal integrity steady during prolonged transfers. The latch on the straight end locks the connection so vibration or cable routing cannot unseat the plug. Data throughput is ultimately limited by the attached drive and controller rather than the cable itself.
Replaces standard straight-to-straight SATA leads
Builders who cannot route a straight connector past a graphics card, cooler or drive bracket will benefit from the angled end. It is not suited for external eSATA ports or right-angled clearance needs. The red jacket aids cable identification in dense wiring looms.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 85% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | SATA3-LEFT30CM |
| Product type | SATA III |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 11 in - 15 in |
| Cable length | 1 ft (0.3 m) |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
Questions about this item
Does the cable generate any heat or noise when used continuously in a server?
No, it is a passive copper cable with shielding and no active components, so it produces no heat or noise during all-day operation.
What must my motherboard or controller provide for this cable to function?
A standard 7-pin SATA data port on the motherboard or host controller is all that is required.
Will the left-angled 90° to 180° connector fit alongside older SATA I or II drives I still use?
Yes, the cable is backwards compatible with SATA I and II ports, and the angled latch connector works in tight spaces next to legacy drives.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12 Inches 15-pin SATA Male to Female Power Extension Cable
- 1 ft (0.3 m)
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III straight to right-angle cable 20" black 3-pack
- Black





