EN-Labs SATA6BK SATA III 6" locking cable — Black
A 6-inch SATA III data cable with locking 180-degree connectors and 26AWG tinned copper conductors for secure 6.0 Gbps drive connections
- Cable length6 in (15.2 cm)
- Connector count2
- Connector details1 x SATA to 1 x SATA
- Connector genderFemale to Female
- Conductor typeCopper Conductor
- Product typeSATA III
- Secure latch prevents accidental disconnects
- 0 Gbps bandwidth supports fast SSDs and HDDs
- 26 AWG tinned copper conductors reduce signal loss
- 6-inch length keeps tight builds tidy
- UL listed and RoHS compliant for safety and environmental standards
Short 6-inch SATA III cable
The EN-Labs SATA6BK is a 6-inch SATA III data cable with latching connectors on both ends. It links 7-pin SATA drives to motherboards or host controllers inside a chassis. The short length suits cramped drive bays or backplane setups where longer cables would obstruct airflow.
SATA III 6 Gbps interface limit
The cable supports the SATA revision III electrical specification up to 6.0 Gbps and remains backwards compatible with SATA I and II ports. Actual throughput is capped by the slowest connected device or controller, so a SATA III SSD on a SATA II port will run at the lower rate.
Capacity headroom for single drives
One cable carries a single drive connection; it cannot serve multiple devices or split bandwidth. The 26AWG tinned copper conductors with shielding handle the full 6 Gbps signal for one SSD or HDD, but a second drive requires an additional cable and a free motherboard port.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | SATA6BK |
| Product type | SATA III |
| Product color | Black |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Connector gender | Female to Female |
| Size & build | |
| Overall length | 6 in (15.2 cm) |
| Cable length | 6 in (15.2 cm) |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
Questions about this item
Should I pick a 6-inch or longer SATA cable for my build?
The 6-inch length suits tight drive cages and short motherboard-to-drive runs; choose a longer cable only if the routing path exceeds that distance.
What does the 6.0 Gbps rating mean for my SSD or HDD?
It supports the SATA III maximum of 6.0 Gbps, so a SATA SSD can reach its rated sequential speed; actual throughput is limited by the drive and controller.
How does the SATA III interface and locking connector affect installation?
The cable uses a 7-pin SATA 180-degree latching receptacle that clicks onto SATA III, II or I ports, providing a secure fit that resists vibration in dense cases.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 4-Pin LP4 to Left Angle SATA Power Adapter Cable 6 Inches
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors 12" SATA III Straight Cable with Locking Latch Black 3-Pack
- Black
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors SATA III 20" 90° to 90° Cable with Locking Latch Black 3-Pack
- Black





