Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a 12 Gbps SFF-8643 host or RAID controller to four SATA drives with 3.3 ft of shielded ribbon cable
This EN-Labs internal cable links a 12 Gbps host or RAID controller with an SFF-8643 port to four SATA drives. The 3.3 ft assembly carries a 36-pin male connector on the controller side and four 7-pin female SATA connectors with latches on the drive side. Woven mesh sheathing covers half the length for easier routing.
Verify that your controller or motherboard presents an SFF-8643 host connector and that the target devices use standard SATA data ports. The cable is a forward breakout design, so it will not mate with a backplane or a target-side SFF-8643 port. Confirm the 3.3 ft reach suits your chassis layout before ordering.
Passive copper construction adds no active cooling requirement and generates no audible noise. The cable draws no external power; it simply carries the 12 Gbps SAS signalling between controller and drives. Acetate cloth tape and the partial mesh sleeve provide strain relief without adding rigidity that could impede airflow.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | SFF86434SATA1M |
| Product type | SFF-8643 to SATA |
| Product color | Black & Blue |
| Performance | |
| Rated speed | 12 Gbit/s |
| Ports & slots | |
| Connector count | 5 |
| Size & build | |
| Overall length | 3.3 ft/1 Meter |
The cable has a 36-pin SFF-8643 male connector on one end and four SATA 7-pin female connectors with latches on the other; no additional brackets or adapters are included in the package.
At 3.3 ft the cable reaches from a RAID controller to drive bays in most 2U and 4U enclosures; select a longer variant only if your backplane sits farther from the controller slot.
The 12 Gbps link runs from the controller to the SFF-8643 end; each SATA drive still operates at its native 6 Gbps maximum, so the cable does not make individual drives faster than the SATA interface allows.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?