Enfain OM3 FC-FC Duplex Multimode Fibre Optic Cable 3.0mm Aqua Blue
OM3 multimode duplex cable with FC-FC connectors for 10-gigabit links at 850 nm
- Supports 10 GbE links with OM3 10-gigabit core
- Low insertion loss of 0.2 dB typical and 0.3 dB maximum
- High return loss exceeding 38 dB for clean signals
- Durable 3.0 mm PVC jacket rated for 1000 mating cycles
- Operates reliably from -20 °C to +60 °C
OM3 duplex patch cable for 10G links
This Enfain OM3 multimode fibre patch cord uses FC connectors on both ends. The aqua-blue 3.0 mm PVC jacket identifies the OM3 core rated for 10-gigabit transmission at 850 nm. It suits switches, servers and data-centre patch panels that require duplex FC connections.
Ceramic ferrules and 3.0 mm jacket for daily
Duplex FC ferrules are ceramic, giving typical insertion loss of 0.2 dB and maximum 0.3 dB with return loss above 38 dB. The 3.0 mm cable withstands a 330 mm bending radius and is rated for 1000 mating cycles across an operating range of -20 °C to +60 °C.
Verify FC ports and OM3 compatibility before
Ensure both devices present FC receptacles and support OM3 multimode fibre at 850 nm. The cable is not suitable for single-mode links, LC or SC interfaces, or wavelengths outside the 850 nm window.
How it compares
Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 83% of the 808 comparable items (median $29.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Enfain OM3 LC-FC Duplex Multimode Fibre Optic Cable Aqua Blue 3.0mm
Questions about this item
What speeds does the OM3 duplex FC-FC cable support in practice?
The OM3 10-gigabit core is rated for 1G, 10G and 40G links at 850 nm wavelength with typical insertion loss of .2 dB and maximum of .3 dB.
What physical space is required to route the 3.0 mm jacket without damage?
The 3.0 mm PVC jacket needs a minimum bend radius of 330 mm and operates from -20 °C to +60 °C.
How do I install the ceramic ferrule connectors without exceeding the rated mating cycles?
Align the FC key, push straight in and hand-tighten the threaded coupling; each end is rated for 1000 insertion and removal cycles.
More in Fiber Optic Patch Cables
Similar items
Mellanox Technologies MCP1600-C003E26N 100GbE QSFP28 3m 26AWG fibre optic cable
- 1 x QSFP28 Network
- Fiber Optic
Micro Connectors FBR-10122M-2P 2m LC/SC OM3 duplex fibre optic cable 2-pack
- Fiber
- Aqua
Black Box Corporation EFN6021-002M fibre optic cable OM2 50-micron LC-SC orange 2m
- Fiber Optic Cables
- Orange
Micro Connectors 10m LC/SC OM3 Duplex 50/125 Aqua fibre optic cable
- Fiber
- Aqua
Black Box Corporation EFN310-002M-LCLC Single-Mode 9-Micron Duplex Fibre Optic Cable LC-LC PVC 2-m 6.5-ft
- Others
- Yellow
WELTRON LC/LC Multi-Mode 50/125 Aqua Fiber Patch Cable 9.84 ft
- 2 x LC Male Network
- Network Cable










