Enfain OM3 LC-ST Duplex Multimode Fibre Optic Cable Aqua Blue
Aqua duplex patch cord with LC and ST connectors carries 10 Gbit multimode signals at 850 nm over a 3.0 mm jacket
- OM3 core supports 10 gigabit multimode transmission
- Duplex LC-ST connectors link switches and servers
- 0 mm PVC jacket protects the fibre
- Typical insertion loss 0.2 dB, maximum 0.3 dB
- Return loss exceeds 38 dB for clean signals
LC-ST Duplex Multimode Patch Cable
The Enfain OM3 cable provides a 10-gigabit multimode link between equipment with LC and ST connectors. It suits data-centre, server-room or switch-to-server connections that require duplex fibre in a single assembly.
Thermals, Noise and Power Draw
Passive fibre carries no electrical current, so the cable adds no heat, no fan noise and no power draw to the rack. It operates reliably from -20 °C to +60 °C and tolerates a 330 mm bending radius during routing.
Build Integration
The 3.0 mm PVC jacket protects the duplex cores while remaining flexible enough for dense patch panels. Ceramic ferrules deliver 0.2 dB typical insertion loss and >38 dB return loss over 1000 mating cycles, freeing the installer from frequent re-termination. Not suited for single-mode runs or links beyond OM3 bandwidth limits.
How it compares
Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 83% of the 808 comparable items (median $29.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Enfain OM3 SC-ST Duplex Multimode Fiber Patch Cable 3.0mm Aqua Blue
Enfain OM3 FC-FC Duplex Multimode Fibre Optic Cable 3.0mm Aqua Blue
Enfain OM3 ST-ST Duplex Multimode Fibre Optic Cable 3.0mm Aqua Blue
Questions about this item
How do I connect the LC and ST ends without exceeding the 330 mm bend radius?
Route the 3.0 mm jacket with gradual curves, securing the cable so no bend is tighter than 330 mm; the ceramic ferrules then seat cleanly in LC and ST ports.
When should I replace this patch cord after repeated mating cycles?
Plan replacement after roughly 1000 insertion and removal cycles, as performance may degrade beyond that point.
What is the maximum insertion loss I can expect on a 10 Gbps link at 850 nm?
The cable specifies a maximum insertion loss of 0.3 dB, with a typical value of 0.2 dB at 850 nm.
More in Fiber Optic Patch Cables
Similar items
Black Box Corporation EFN6021-002M fibre optic cable OM2 50-micron LC-SC orange 2m
- Fiber Optic Cables
- Orange
Micro Connectors FBR-10122M-2P 2m LC/SC OM3 duplex fibre optic cable 2-pack
- Fiber
- Aqua
Black Box Corporation EFN310-002M-LCLC Single-Mode 9-Micron Duplex Fibre Optic Cable LC-LC PVC 2-m 6.5-ft
- Others
- Yellow
Micro Connectors 10m LC/SC OM3 Duplex 50/125 Aqua fibre optic cable
- Fiber
- Aqua
Mellanox Technologies MCP1600-C003E26N 100GbE QSFP28 3m 26AWG fibre optic cable
- 1 x QSFP28 Network
- Fiber Optic
WELTRON LC/LC Multi-Mode 50/125 Aqua Fiber Patch Cable 9.84 ft
- 2 x LC Male Network
- Network Cable










