ESTONE 3-Pack 18-inch SATA III 6.0 Gbps Cable
Three 18-inch SATA III cables with locking latches support 6.0 Gbps data transfer for HDDs, SSDs and optical drives
- Product colorBlack
- SATA III 6.0 Gbps data transfer for fast storage upgrades
- Locking latch on each 180-degree connector secures the link against vibration
- 18-inch straight cables keep internal routing tidy and flexible
- Three cables in one pack give spares for multiple drives or replacements
- Backwards compatible with SATA I and SATA II devices
3-Pack 18-inch SATA III Data Cables
This three-pack supplies 18-inch SATA III cables rated for 6.0 Gbps data transfer. Each cable uses a 7-pin female-to-female design with a locking latch on both straight 180-degree connectors. They connect internal hard drives, SSDs and optical drives to motherboards or host controllers. The black cables are backwards compatible with SATA I and SATA II devices.
Check Motherboard Ports And Drive Bays
Verify that your motherboard or controller has free SATA data ports before ordering. Measure the routing distance between the port and the drive bay to confirm an 18-inch length is sufficient. Ensure the drives you plan to connect use standard SATA data interfaces rather than other form factors. The locking latches require a small amount of clearance around each port.
Suits Builders Needing Multiple Internal Drives
These cables suit anyone adding or replacing several SATA storage devices at once. The pack provides spares for future upgrades or emergency replacements. Builders who need right-angle connectors for tight spaces should look elsewhere. Users requiring longer runs for full-tower layouts or external eSATA enclosures will need different cable lengths.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 75% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Questions about this item
What cables are included and is any extra hardware required?
The pack contains three 18-inch SATA III data cables with straight 180-degree locking connectors; no additional hardware is needed for a standard internal drive installation.
Which version should I pick if my motherboard supports SATA 3.0?
These cables are built to the SATA 3.0 specification and support up to 6.0 Gbps, so they match a SATA 3.0 motherboard and remain compatible with older SATA revisions.
Will I see 6.0 Gbps transfer rates once the cable is connected to my SSD?
The cable can carry up to 6.0 Gbps, but the actual speed is limited by the drive and controller you attach; the cable itself does not increase the device's rated performance.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
NEON Drive IEEE 1394 Firewire cable 4-pin to 9-pin 300cm 10-ft
- IEEE 1394(Firewire)
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





