ESTONE SATA III Cable 3-Pack 90 Degree 18-inch 6.0 Gbps Locking Latch
Three 18-inch SATA cables with one 90-degree and one straight locking connector each, rated for 6.0 Gbps data transfer
- Product colorBlack
- Right-angle connector fits tight spaces with 90° design
- Locking latch secures connection against vibration and movement
- 0 Gbps SATA III speed supports modern SSDs and HDDs
- Backwards compatible with SATA I and II drives
- Three cables in one pack provide spares for multiple installations
Three-cable SATA III set
This pack contains three SATA III cables, each 18 inches long with a 90-degree right-angle connector on one end and a straight 180-degree connector on the other. Both ends feature a locking latch to secure the connection against vibration. The cables support the SATA 3.0 specification for data rates up to 6.0 Gbps and are backward compatible with SATA I and II drives. They connect internal hard drives, SSDs, and optical drives to motherboards or host controllers.
Builders adding multiple drives
These cables suit anyone installing several SATA storage devices or optical drives who wants a secure, latched connection in a tight chassis. The right-angle plug helps route cables cleanly behind drive cages or against motherboard trays. Buyers who need external eSATA links, longer runs than 18 inches, or a different connector orientation should look at other options. The three-pack also provides spares for future upgrades or replacements.
6.0 Gbps SATA 3.0 rating
The decisive specification is the SATA revision 3.0 rating of 6.0 Gbps, which sets the maximum interface bandwidth for any drive attached to these cables. Actual throughput will be limited by the slowest component in the chain, whether that is the drive, the controller, or the cable itself. Verify that your motherboard or controller and your storage device both support SATA 3.0 to reach the full 6.0 Gbps potential.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 80% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Questions about this item
What motherboard port is required to use these SATA III cables?
A standard internal SATA port on the motherboard or host controller is required for the 7-pin female connectors.
Will the 90-degree connector fit alongside older SATA I or II drives?
Yes, the cable is backwards compatible with SATA I and II drives while supporting up to 6.0 Gbps speeds.
How can I confirm the locking latch is engaged after installation?
The latch clicks securely into the drive and motherboard ports, resisting movement or vibration when properly seated.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors SATA cable 40 inches straight to right angle locking latch black 3 pack
- Black
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors 23" 1-to-4 15-Pin SATA Power Splitter Cable
- SATA
- Black
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 0.5 m SATA III Right Angle to Right Angle Data Cable 3-Pack Red
- Red





