Fervit 100cm Mini SAS 4×SFF8087 to 4×SFF8482 Cable with IDE Power
Fanout cable converts a 36pin SFF8087 Mini SAS host port to four 29pin SFF8482 SAS/SATA drive connectors with an IDE power plug for stable drive supply
- Fanout design splits one SFF8087 36pin host port into four SFF8482 29pin drive connections
- Integrated IDE power connector delivers stable power to attached drives reducing cable clutter
- High-grade copper conductors maintain signal integrity for high-speed SAS data transfer with minimal loss
- Designed for enterprise RAID controllers and multi-disk storage backplanes in server environments
- 100cm length provides flexible routing inside large rackmount servers and storage enclosures
Connectivity & Interface
The Fervit 100cm Mini SAS cable connects a 36pin SFF8087 host port to four SFF8482 29pin SAS or SATA drive interfaces. An integrated IDE power connector supplies drive power directly from the cable, reducing internal wiring complexity in server chassis.
Suitable builds & limitations
This fanout cable suits administrators wiring enterprise RAID controllers or storage backplanes in multidisk servers where 100cm reach matches the chassis layout. It will not work for systems that use a different host connector pinout or drive interface, nor for installations that cannot accommodate an IDE power source.
Deciding specification
The single specification that determines fit is the 36pin SFF8087 to 4×SFF8482 29pin fanout wiring; the host side and each target side must match these exact connectors for the cable to function.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $19.99
- Pricier than about 73% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Fervit |
Questions about this item
Will the SFF8482 29pin connectors or IDE power plug need replacement after extended use?
The cable uses a highgrade copper wire harness for low signal loss and the builtin IDE power connector supplies stable power; no periodic replacement of the 29pin or 36pin connectors is required under normal server operation.
What limits sustained data throughput when the fanout cable runs continuously in a RAID array?
The 4channel SFF8087 36pin host interface and SFF8482 29pin target links set the signalling ceiling; the copper harness is designed for highspeed SAS transmission with low crosstalk so the controller and backplane determine the practical limit.
How much heat or noise does the 100cm cable add when drives spin all day?
The passive copper harness generates no noise and negligible heat; only the attached drives and RAID controller produce measurable warmth and sound during all-day operation.
More in SATA & eSATA Drive Cables
Similar items
Electop Black-02 SATA III 90° braided cable 20 in black 5-pack
- Sata 3
- Composite
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
2-Power ST345AP SATA to USB Type-A Cable 1.8 in Red
- 1.8 in (4.57 cm)
- Type
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





