Fervit Mini SAS SFF8088 Male to 4×SATA Female Breakout Cable 1M 3.3FT
Connects a 26-pin SFF8088 SAS host to four SATA drives with latched connectors for stable enterprise storage wiring
- Connect four SATA drives with one SFF8088 port
- Latch-equipped connectors keep links secure under vibration
- 3 ft length suits internal and external server wiring
- Rugged build reduces signal loss and crosstalk
- Supports high-speed data transfer for multi-drive arrays
SAS Breakout Cable for Server Storage
This Fervit cable splits a single Mini SAS SFF8088 male port into four SATA 4-pin female connectors. It is designed for administrators wiring multi-drive arrays between a SAS host or controller and a SATA backplane. The 1 metre length supports flexible routing inside or outside a server chassis. Secure latches on each connector maintain a stable link under vibration.
Suits SAS-to-SATA Backplane Wiring
Installers building or servicing enterprise storage enclosures will find the 1-to-4 breakout layout matches typical backplane pinouts. The rugged construction reduces signal loss and crosstalk across all four lanes. Buyers who need a different pin count, an alternative connector gender, or a cable without latches should choose another product.
26-Pin SFF8088 Male Interface
The cable terminates in a 26-pin SFF8088 male plug that mates directly with standard Mini SAS controller ports. This connector defines compatibility with the host side of the link. Verify that your controller or HBA presents an SFF8088 receptacle before purchase.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $25.99
- Pricier than about 84% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Fervit |
Questions about this item
Does the cable include the SATA power cables for the four drives?
The breakout provides only the 26-pin SFF8088 male to four SATA 4-pin female data connections; separate SATA power cables are required for each drive.
Which SAS controller port does the 8088 male connector fit?
The SFF8088 male end plugs into a standard external Mini SAS 26-pin port on a SAS host bus adapter or RAID controller.
What data rate can I expect on each of the four SATA links?
Each lane carries the full SAS lane speed, so every attached SATA drive runs at its native SATA 6 Gb/s rate without sharing bandwidth.
More in SATA & eSATA Drive Cables
Similar items
Fervit Mini SAS HD SFF8643 to SFF8639 12Gbps SAS 3.0 Cable 39.37in with SATA 15Pin Y Power
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





