FormulaMod PCIe 5.0 12VHPWR 16-pin Internal Power Cable Black
PCIe 5.0 12VHPWR cable with 16 AWG tinned copper wire supports 600 W for RTX 40 series and 3090 Ti and includes three dedicated cable combs for neat routing
- Product colorBlack
- PCIe 5.0 ready cable supports RTX 40 series and 3090 Ti
- 16 AWG tinned copper handles up to 600 W without overheating
- 700 mm length gives flexible routing inside the case
- Three dedicated combs keep the 12+4 pin wires tidy
- Male-to-male modular design connects direct to PSU and GPU
FormulaMod PCIe 5.0 12VHPWR Cable
This FormulaMod internal power cable delivers a 16-pin 12VHPWR male-to-male connection for modern graphics cards. It targets builders upgrading to RTX 40-series or 3090 Ti GPUs without replacing their existing power supply. The 700 mm length suits standard mid-tower layouts while keeping cable runs manageable.
16 AWG Tinned Copper With Dedicated Combs
The cable uses 16 AWG tinned copper wire in a three-layer braided sleeve rated for loads exceeding 600 W. Three custom 12+4-pin combs are included to align the sixteen conductors neatly near the connector. Builders can slide the combs into position for a clean look, though the sense wires require gentle handling during adjustment.
Replaces Native 12VHPWR Leads Or Adapter Bundles
This single cable replaces a missing native 12VHPWR lead on modular PSUs or bulky multi-plug adapter bundles that occupy three 8-pin ports. The jump is worth it when the PSU already offers a 16-pin 12VHPWR output and the builder wants a shorter, sleeved run with integrated combs. It does not add a 12VHPWR port to PSUs lacking one.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $19.99
- Pricier than about 61% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Questions about this item
What does the PCIe 5.0 12VHPWR 16-pin interface support in practice?
The cable carries up to 600 W through 16 AWG tinned copper conductors and is built for RTX-40 series and 3090Ti graphics cards.
What clearance and mounting points does the 700 mm cable need?
It requires a PSU with a native 16-pin 12VHPWR port and a graphics card with a matching 16-pin 12VHPWR socket; three dedicated combs are included for routing.
How is the cable installed and what step do people get wrong?
Plug each end fully into the PSU and GPU 16-pin ports, then slide the combs slowly into position — forcing them can damage the sense wires, and sharp bends near the connector must be avoided.
More in Internal PSU & Riser Cables
Similar items
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
GELID SOLUTIONS CA-PWM-03 1-to-4 4pin PWM Fan Power Splitter internal power cable
- 1.37 ft (0.42 m)
- Cable Kits





