FormulaMod PCIe 5.0 12VHPWR 16pin Sleeved Modular Cable White
White 16 AWG sleeved cable with dedicated combs carries 600 W over 700 mm for RTX 40 series and 3090 Ti cards
- Product colorWhite
- Supports RTX 40 series and 3090Ti with native 12VHPWR connector
- 16 AWG tinned copper handles up to 600 W without overheating
- Three-layer braid and 700 mm length give clean routing in any build
- Dedicated 12+4 pin combs keep wires aligned for a tidy interior
- Male-to-male modular design plugs straight into PSU and GPU with no adapters
White 12VHPWR cable for RTX 40 and 3090Ti
This FormulaMod cable connects a modular power supply directly to a 16-pin 12VHPWR graphics-card connector. It is built for owners of RTX 40-series cards or the 3090Ti who want a clean white sleeved link without replacing their PSU. The 700 mm length suits most mid-tower builds.
Sustained load on 16 AWG tinned copper
The cable uses 16 AWG tinned copper with a three-layer braid rated for continuous draws above 600 W. Under prolonged full-load sessions the conductors stay cool and resistance remains low, so voltage delivery to the GPU is stable. Three dedicated combs keep the 12+4 wires aligned and prevent sag near the connector.
Replaces native 12VHPWR leads or adapter bundles
Builders upgrading to a 12VHPWR card can swap a short or stiff factory cable for this longer, more flexible white run. It is not for systems that lack a modular 12VHPWR port on the PSU side or for owners who need multiple GPU power cables from a single kit.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $18.99
- Pricier than about 60% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | White |
Questions about this item
Does the 16 AWG cable run hot when the 12VHPWR link is pulling 600 W all day?
The 16 AWG tinned copper wire uses a three-layer braid designed to run at full load without getting hot, with low resistance and a maximum power rating above 600 W.
What PSU connectors must I already have to use this male-to-male 16-pin cable?
Your PSU must provide three PCIe 8-pin outputs so they can be converted to the single 12+4-pin 12VHPWR plug on the graphics card.
Will this white sleeved cable fit cleanly alongside an older RTX 3090 Ti in a tight case?
The 700 mm length and three dedicated 12+4-pin combs let you route the cable neatly, but avoid sharp bends near the connector and seat it fully in the card’s power port.
More in Internal PSU & Riser Cables
Similar items
Shenzhen Aimilai Technology Co.Ltd. PCIe 3.0 4X Extension Cable 20cm 24cm
- Black
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





