Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
XT60 parallel adapter joins two 20V-72V battery packs for up to 40A combined discharge in a lightweight aluminium housing
This GCON adapter connects two battery packs in parallel to increase available current and capacity for electric bikes. It accepts a DC input range of 20V to 72V and supports a continuous rating of 40A. The module uses XT60 connectors with male inputs for the batteries and a female output for the controller. It is designed for riders who need extended range or higher discharge capability from a dual-battery setup.
Installation requires plugging each battery into the male XT60 inputs and connecting the female XT60 output to the bike controller. The aluminium alloy housing is lightweight and intended for straightforward mounting on the frame. A common issue is accidentally reversing the polarity on one of the input leads, which can cause a short circuit. Users must also ensure both battery packs share the same voltage level before connecting them in parallel to prevent damaging current flow between packs.
The adapter is rated for a maximum of 40A across the 20V to 72V input window, so total power delivery depends on the specific battery voltage used. It supports only two packs simultaneously and cannot manage three or more batteries in parallel. The XT60 connector itself becomes a bottleneck if the combined draw exceeds its continuous current rating. This unit will not suit builds that require series wiring for higher voltage or systems needing active balancing circuitry between cells.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Measure the output voltage at the female XT60 connector with a multimeter while the bike is powered on; it should match the combined pack voltage and the controller should draw up to 40 A without the aluminium housing becoming excessively hot.
The module provides two male XT60 input leads and one female XT60 output lead in an aluminium alloy housing; you must supply two battery packs with matching XT60 plugs and a controller that accepts the same connector.
This unit is rated for 40 A continuous discharge across the 20 V–72 V range; select it only if your controller and wiring are sized for 40 A, otherwise choose a lower-rated adapter that matches your system's maximum current draw.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?