Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 120×20 mm, 2.5 mm soft thermal pad rated at 12 W/m·K for GPU memory, VRMs and M.2 SSDs, non-conductive and non-curing
The GELID SOLUTIONS GP-Extreme is a thermal interface pad designed for PCBs with height differences and uneven surfaces. It targets builders and technicians working on graphics cards, laptops or gaming consoles where components sit at varying heights. The pad is non-electrically conductive, non-corrosive, non-curing and non-toxic for safe handling. Its softness allows it to fill gaps around memory ICs, MOSFETs and other SMD parts effectively.
The pad is rated at 12 W/mK conductivity and 2.5 mm thickness to bridge larger gaps between dies and heatsinks. It works best on flat or slightly uneven surfaces such as VRM arrays, RAM modules and M.2 SSD controllers. Because the material is soft, it conforms without excessive pressure that could damage delicate packages. The 120×20 mm sheet covers broad areas but cannot replace thin paste on tightly clamped CPU dies. Users needing sub-millimetre bond lines should choose a different compound.
This pad upgrades from thinner or lower-conductivity sheets when component stacks exceed typical heights. The jump is worth it when stock pads leave air gaps on tall MOSFETs or memory chips, causing throttling. It also replaces makeshift stacks of multiple thin pads that can shift over time. Builders who only need a thin layer for a standard CPU or GPU core will not benefit from the extra thickness.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
This listing is for a single 120×20 mm pad at 2.5 mm thickness; no other dimensions or versions are offered here.
The 12 W figure indicates the thermal load the pad is designed to handle across its surface when bridging uneven components to a heatsink.
It is a universal thermal pad with no electrical interface; it simply conforms to component surfaces to transfer heat to the cooler.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?