GIGABYTE E143-E30-AAG1 barebone server AMD EPYC 8004 1U 2-bay Gen5 NVMe/SATA/SAS-4 12 DIMMs
A 1U edge barebone accepting a single AMD EPYC 8004 processor, 12 DDR5 DIMMs, two 2.5-inch Gen5 NVMe/SATA/SAS-4 hot-swap bays, two FHHL PCIe Gen5 x16 slots and two OCP NIC 3.0 PCIe Gen5 x16 slots
- Supports single AMD EPYC 8004 processor for high-density compute
- 12 DDR5 RDIMM slots deliver large memory capacity
- Two 2.5-inch Gen5 NVMe/SATA/SAS-4 hot-swap bays enable fast storage
- Dual FHHL PCIe Gen5 x16 slots plus two OCP NIC 3.0 slots for expansion
- Dual ROM architecture adds firmware redundancy
Single-socket EPYC 8004 platform
This 1U barebone server accepts one AMD EPYC 8004 series processor and provides twelve DDR5 RDIMM slots across six memory channels. It is built for edge deployments that need high core density in a shallow rack footprint.
Dual ROM with PCIe Gen5 expansion
Dual ROM architecture adds firmware redundancy for platform resilience. Two full-height half-length PCIe Gen5 x16 slots and two OCP NIC 3.0 PCIe Gen5 x16 slots enable high-throughput networking or accelerator cards.
2.5-inch Gen5 NVMe/SATA/SAS-4 bays
Two hot-swap 2.5-inch drive bays support Gen5 NVMe, SATA and SAS-4 devices simultaneously. This mix determines whether the chassis can serve both ultra-low-latency flash and high-capacity spinning media in the same 1U space.
How it compares
Measured against everything we stock in Barebone Servers & DIY Kits, at today’s prices. Recalculated every night.
- Price $1,143.99
- Cheaper than about 86% of the 532 comparable items (median $2,503.49).
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Shipping weight | 14.00 kg |
| Package size | 787 × 737 × 226 mm |
Questions about this item
Which storage drives in the 2.5-inch bays may need replacement after heavy write cycles?
The two 2.5-inch hot-swap bays accept NVMe, SATA or SAS-4 drives; any drive installed there can be swapped later when its endurance limit is reached.
What thermal limit appears first when both PCIe Gen5 x16 slots and both OCP NIC 3.0 slots are fully loaded?
The 1U chassis must cool the EPYC 8004 processor, twelve DDR5 DIMMs and four full-length Gen5 cards simultaneously, so case airflow becomes the limiting factor.
How much power does the 1GbE LAN port add when the server runs continuously?
The single Intel I210-AT port draws only a few watts, so the dominant power draw comes from the EPYC 8004 CPU, memory and any installed add-in cards.
More in Barebone Servers & DIY Kits
Similar items
ASRock Rack 1U4LW-ICX/2T 1U barebone server
- Supports 3rd Gen In…
- 1U Rackmount
GIGABYTE R184-S90-AAV1 barebone server 1U dual Xeon 6 4-bay Gen5 NVMe/SATA/SAS-4 32 DIMM
- Xeon 6 Processors,…
- 1U Rackmount
GIGABYTE R113-C10-AA02-L1002 barebone server EPYC 4464P 64GB DDR5 1TB
- Supports AMD EPYC 4…
- 1U Rackmount
ASUS RS500A-E11-WOCPU006Z 1U barebone server
- Supports AMD EPYC 7…
- 1U Rackmount





