GIGABYTE E263-Z34-ACJ1 barebone server EPYC 9004/9005 SP5 12 DIMMs 2 GPU
Edge server barebone supporting AMD EPYC 9004/9005 processors with 12 DDR5 DIMM slots and two dual-slot Gen5 GPU bays
- ProcessorAMD EPYC 9004 Series
- Processor socketSocket SP5
- Target workloadEdge Server
- Dual EPYC 9004/9005 processors power edge workloads
- 12 DDR5 RDIMM slots deliver high memory bandwidth
- Two Gen5 GPU slots accelerate compute tasks
- 5-inch NVMe/SATA/SAS hot-swap bays enable fast storage
- Dual ROM architecture adds firmware resilience
Edge barebone for dual Gen5 GPUs
This 2U barebone server is built for edge workloads that demand two full-height PCIe Gen5 graphics cards. It accepts a single AMD EPYC 9004 or 9005 processor in an SP5 socket and provides twelve DDR5 RDIMM slots for memory expansion. The platform targets inference, rendering or compute tasks at the network edge.
Rear hot-swap bays and dual ROM
Two 2.5-inch drive bays on the rear panel support Gen5 NVMe, SATA or SAS-4 media with hot-swap capability. A single 1 Gb/s LAN port uses an Intel I210-AT controller. Dual ROM architecture adds firmware redundancy, while an M.2 slot with PCIe Gen3 x4 interface offers additional storage flexibility.
Two full-height PCIe Gen5 x16 GPU slots
The chassis provides two full-height, full-length PCIe Gen5 x16 slots specifically for dual-slot GPUs. This fixed GPU capacity defines the system's role: it suits workloads that need exactly two accelerators and cannot scale beyond that count. Buyers needing more than two GPUs or a different slot layout should consider other platforms.
How it compares
Measured against everything we stock in Barebone Servers & DIY Kits, at today’s prices. Recalculated every night.
- Price $1,726.99
- Cheaper than about 72% of the 532 comparable items (median $2,503.49).
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Target workload | Edge Server |
| Processor | |
| Processor | AMD EPYC 9004 Series |
| Processor socket | Socket SP5 |
| Size & build | |
| Shipping weight | 18.21 kg |
| Package size | 737 × 584 × 292 mm |
Questions about this item
What PCIe generation do the two GPU slots use, and what bandwidth does that cap each card at?
Both full-height full-length slots are PCIe Gen5 x16, so each GPU can run at up to Gen5 x16 bandwidth.
What chassis depth and rear clearance are needed for the dual-slot Gen5 GPUs and the 2.5-inch hot-swap bays?
The 2U rackmount chassis accepts two dual-slot Gen5 GPUs internally and provides two 2.5-inch hot-swap bays at the rear, so allow standard 2U depth plus cable bend radius behind the bays.
How are the GPUs installed, and which step is most often missed?
Remove the riser brackets, seat each GPU into a PCIe Gen5 x16 slot, secure the retention screws, then connect auxiliary power cables from the PSU — forgetting the power cables is the common miss.
More in Barebone Servers & DIY Kits
Similar items
MSI S1205-01-10G barebone server, dual Xeon, 12 NVMe bays, 2x 10Gb networking
GIGABYTE R184-S90-AAV1 barebone server 1U dual Xeon 6 4-bay Gen5 NVMe/SATA/SAS-4 32 DIMM
- Xeon 6 Processors,…
- 1U Rackmount
XFusion 2288HV5 barebone server, 12 × 3.5″ bays, dual GbE + dual 10 GbE
- Xeon Scalable
- Rack
Inspur NP3020M7 barebone server E-2314 16GB DDR4 3200 4TB SATA 4-port Gigabit DVDRW keyboard mouse 300W
- AMD EYPC
- Rack





