HANNORD SATA Cable III 3 Pack 6Gbps Locking Latch 15.75 Inch Red
Three 15.75-inch SATA III cables with locking latches connect drives at up to 6 Gbps
- Product colorRed
- Up to 6 Gbps transfer speed with SATA 3.0 support
- Locking latches on both ends secure every connection
- Three cables in one pack cover multiple drives or RAID
- 75 inch length simplifies routing inside the case
- Compatible with 2.5 and 3.5 inch drives plus optical devices
Three-pack SATA III data cables
This three-pack supplies three straight SATA III cables, each 15.75 inches long with locking latches on both ends. They connect motherboards or host controllers to internal hard drives, solid-state drives or optical drives for expanded storage. The red colour helps cable identification inside the case. Each cable carries data only and does not deliver power to the attached drive.
Suits builders adding multiple drives
The pack is ideal for anyone installing several SATA drives at once or keeping spares for future upgrades. It works with 2.5-inch SSDs, 3.5-inch hard drives, DVD drives and RAID controller cards. Buyers who need right-angle connectors, longer lengths or a different colour should look at other options. The cables also cannot serve drives that require a power connection from the same lead.
Check motherboard ports
Verify that your motherboard or controller has enough free SATA ports for the number of drives you plan to connect. Ensure the 15.75-inch length reaches from each port to the drive mounting location without strain. Confirm each drive has a separate power connector from the power supply, because these cables transmit data only.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 85% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Red |
Questions about this item
Does my motherboard need a free SATA port for each cable in the 3-pack?
Yes, each cable requires one SATA port on the motherboard or host controller, so three free ports are needed to use all three cables at once.
Will these cables run at 6 Gbps with a SATA II drive?
The cables are backwards compatible with SATA I and SATA II, but the transfer speed will be limited to the drive's own rating rather than the cable's 6 Gbps maximum.
How can I confirm the locking latch is seated correctly after plugging in?
Push each connector until the stainless-steel clip clicks into the 7-pin receptacle; a firm tug should not dislodge the cable if the latch is fully engaged.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12 Inches 15-pin SATA Male to Female Power Extension Cable
- 1 ft (0.3 m)
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III straight to right-angle cable 20" black 3-pack
- Black





