HANNORD SATA Power Y Splitter Cable 15 Pin Male to Dual Female 7 Inch 2 Pack
A 7-inch Y-splitter turns one SATA power connector into two, adding drives without extra PSU cables
- Connector count3
- Connector details15 Pin SATA
- Connector genderMale to Female
- Product typeSATA
- Product colorBlack
- Overall length6 in - 10 in
Pack 1 Pack
- Turn one SATA power port into two
- Supports 3.3V, 5V and 12V power rails
- 18 AWG wire handles the current load
- Connects 2.5 inch SSD and 3.5 inch hard drives
- 7 inch length keeps cable routing tidy
SATA Power Y Splitter Cable
This cable converts a single 15-pin SATA power connector into two female ports. It is designed for desktop builders who need to add extra drives when the power supply lacks enough native connectors.
Check your power supply rating
The unit draws 3.3V, 5V and 12V from the existing rail, so verify the PSU can handle the additional load. Ensure the 7-inch reach suits your drive layout and that 18 AWG wiring matches your build requirements.
Thermals noise and power draw
Passive wiring produces no fan noise and adds negligible heat inside the case. Power consumption depends entirely on the connected drives, not the splitter itself. The short 7-inch length keeps voltage drop minimal for typical SSD or hard-drive loads.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Hannord |
| Product type | SATA |
| Product color | Black |
| Ports & slots | |
| Connector count | 3 |
| Connector details | 15 Pin SATA |
| Connector gender | Male to Female |
| Size & build | |
| Overall length | 6 in - 10 in |
Questions about this item
What cables come in the pack and do I need anything extra to connect two drives?
The pack contains two 7 inch SATA 15 pin male to dual female splitter cables. No extra cables are required; each splitter turns one power supply SATA connector into two drive connectors.
Which length or pack size should I choose for a typical desktop build?
The only length offered is 7 inches (20 cm) and the product is sold as a 2 pack. This length suits most internal drive bays and the twin pack covers two additional drives.
What does the 18 AWG wire gauge mean for powering a 3.5 inch hard drive and a 2.5 inch SSD together?
18 AWG conductors carry the 3.3 V, 5 V and 12 V rails from the power supply. The gauge is adequate for the combined draw of a 3.5 inch hard drive and a 2.5 inch SSD provided the PSU rating supports the extra load.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors 4-Pin LP4 to Left Angle SATA Power Adapter Cable 6 Inches
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12" SATA III Straight Cable with Locking Latch Black 3-Pack
- Black
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III 20" 90° to 90° Cable with Locking Latch Black 3-Pack
- Black





