HANNORD SATA to USB 3.0 cable 2.5" nylon braided grey
Connects a 2.5" SATA drive to a USB 3.0 port at up to 5 Gb/s with plug-and-play and hot-swap support
- Product colorGray
- Up to 5 Gb/sec transfer speed for quick file moves
- Hot-swap and plug-and-play support for drive swaps without rebooting
- Works with Windows, Mac, Linux and Chrome OS
- Backward compatible with USB 1.0, 1.1 and 2.0 ports
- Designed for 2.5 inch SATA SSDs and HDDs only
SATA-to-USB 3.0 adapter for 2.5-inch drives
This grey nylon-braided cable converts a 2.5-inch SATA SSD or hard drive to a USB 3.0 connection. It is aimed at users who need quick, temporary access to laptop-class storage for data recovery, cloning or file transfer. The adapter draws power from the USB port so no external supply is required.
USB 3.0 bandwidth and backward compatibility
The SuperSpeed USB 3.0 interface tops out at 5 Gb/s, though real-world throughput depends on the drive and host controller. The link is backward compatible with USB 2.0 and 1.1 ports, dropping to their lower speeds automatically. SATA 1.5 Gb/s disks are also supported, so older drives still function.
Capacity scope: 2.5-inch SATA only
The adapter works with any 2.5-inch SATA SSD or hard drive that follows the Mass Storage Class specification. It cannot power or connect 3.5-inch desktop drives because the USB port does not supply enough current. Users needing larger desktop disks must use a dock or enclosure with its own power adapter.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 80% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Gray |
Questions about this item
Which cable length should I choose for my setup?
This cable is offered in a single 2.5 inch form-factor version with a grey nylon braided jacket, so there is no length option to select.
What does the 5Gbps headline speed mean when I connect a drive?
The 5Gbps figure is the theoretical maximum of the USB 3.0 interface; real-world throughput will be lower and limited by the drive's own SATA speed.
Which USB and SATA standards does the adapter use, and what do they cap?
It uses USB 3.0 and SATA, backward compatible with USB 1.0, 1.1, 2.0 and SATA 1.5Gb/s, capping transfer at the slowest link in the chain.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors SATA cable 40 inches straight to right angle locking latch black 3 pack
- Black
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 23" 1-to-4 15-Pin SATA Power Splitter Cable
- SATA
- Black
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors 0.5 m SATA III Right Angle to Right Angle Data Cable 3-Pack Red
- Red





