Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a standard 24-pin ATX connector to a 10-pin motherboard header using 18 AWG wire in a 30 cm length
This 30 cm adapter converts a standard ATX 24 pin female connector to a 10 pin male header for motherboard power. It is built with 18AWG wire for reliable current delivery. The cable suits builders adapting a modern power supply to a board with a 10 pin power input. It is not for systems that require the full 24 pin ATX connection or additional CPU power headers.
The 18AWG conductors maintain stable voltage delivery during continuous operation without the voltage drop seen in thinner wires. The direct pin-to-pin wiring introduces no active components that could limit current over time. The adapter handles the motherboard power draw as long as the source supply and 10 pin header rating allow. It is not for loads that exceed the 10 pin connector’s own current specification.
The passive cable adds no fan noise or active heat generation to the system. The 18AWG wire gauge keeps resistive heating low under normal motherboard power draw. No additional power is consumed beyond the negligible resistance of the 30 cm length. It is not for environments where the cable routing places it directly against high-temperature components without airflow.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | USB to DB9 (RS-232) |
The 18AWG wire is rated for the current carried by a standard ATX 24-pin to 10-pin connection, so heat stays within normal limits for continuous use.
Your motherboard needs a standard 24-pin ATX power socket; the adapter plugs directly into it and breaks out the 10-pin feed.
At 30cm the cable spans most ATX and micro-ATX layouts, letting the 10-pin connector reach edge-mounted headers on older boards.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?