APC AP7723 Switched Rackmount PDU 20A 230V 8xC13 1xC19
- cUL Listed, EN 5502…
- Switched
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A switched and metered PDU delivering 7.3 kVA at 230 V with 20 C13 and 4 C19 outlets, ±1 % metering accuracy and remote management via web, CLI or SNMP
The HPE G2 Metered Switched PDU delivers 7.3kVA at 230V through a single-phase IEC 60309 32A input. It provides twenty C13 and four C19 outlets for rack-mounted servers and network gear. Metering meets IEC 62053-21 Class 1 with ±1% accuracy on amperage, voltage, wattage and kilowatt-hours. An OLED display gives local status and alerts.
This unit fits administrators who need outlet-level power data and remote on/off control via web UI, CLI or SNMP. Two 16A circuit breakers protect the 32A feed and the 10-metre input cord reaches distant panels. Buyers who require three-phase input, higher kVA capacity or outlet counts beyond twenty-four should evaluate other models.
The defining specification is the ±1% Class 1 metering accuracy across every outlet. It enables precise capacity planning, departmental charge-back and threshold alerting without external sensors. If your monitoring stack relies on SNMP or a web dashboard, this PDU integrates directly; if you only need basic power distribution without measurement, a simpler strip will suffice.
Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Switched, Metered |
It supports up to 7.3 kVA of connected load on a single-phase 230 V supply, with two 16 A circuit breakers protecting the outlet groups.
The input plug follows the IEC 60309 32 A single-phase standard for 220–240 V service.
It ships with mounting brackets and hardware for vertical installation in a standard rack.
More in Rackmount PDUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?