Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts an SFF-8673 4X MiniSAS-HD link to an M.2 M-key PCIe 4.0 slot with an integrated ReDriver, clock buffer and side-band translators for extended signal reach
This Innocard adapter connects an M.2 M-key slot to a MiniSAS-HD SFF-8673 4X interface using a built-in PCIe ReDriver. It supports PCI Express 4.0 at 16 GT/s across a x4 link. A 100 MHz clock buffer and SMBus repeater with voltage-level translation extend signal reach for longer cables. Hot-plug support is included via PERST# and PWRDIS translators tied to the SFF-8673 connector.
The card fits rack, microserver and tower platforms needing to bridge M.2 storage or accelerators to MiniSAS-HD backplanes. It operates under Windows 8, 8.1, 10, 11 and UEFI 2.3.1 or later. Builders without an M.2 M-key slot or a MiniSAS-HD SFF-8673 4X port cannot use this changer. Systems limited to PCIe 3.0 will not gain Gen4 speeds from the adapter alone.
The integrated ReDriver restores 16 GT/s differential signals while the clock buffer drives extended trace lengths. Voltage-level translators handle PERST#, WAKE#, CLKREQ# and PWRDIS across the SFF-8673 B1, C1, B2 and C2 pins. The SFF-8673 connector uses 30 µin gold mating-area plating. Compliance covers PCIe Base 4.0, CEM 4.0, M.2 4.0, SFF-8613 3.5.4_C and SFF-9402 1.1 specifications.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
The adapter has a built-in SFF-8673 connector with 30u gold plating; a separate MiniSAS-HD cable is required to reach the target device.
It complies with PCI Express Base Specification Rev 4.0 and the M.2 Spec Rev 4.0, delivering 16 GT/s over an x4 link.
The on-board ReDriver, 100 MHz clock buffer and SMBus repeater are designed to extend 16 GT/s differential signals across longer traces and cables.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?