Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts an M.2 22110 NVMe SSD to a U.2 SFF-8639 bay with PCIe 4.0 support and a hot-plug power protection IC
This Innocard adapter converts an M.2 NVMe SSD to a U.2 SFF-8639 interface using PCIe 4.0 signalling. It is built for system integrators and technicians who need to install M.2 22110 drives into 2.5-inch U.2 drive bays or backplanes. The board is designed and manufactured in Taiwan.
An on-board PWM buck converter steps 12 V down to 3.3 V with up to 5.5 A output current and includes over-current, under-voltage and thermal shutdown safeguards. A dedicated 3.3 V hot-swap controller manages inrush current up to 6.5 A for safe drive insertion. The adapter also provides 1.8 V/3.3 V level shifting for SMBus, PERST#, CLKREQ#, WAKE# and PWRDIS signals, plus a 64 KB SMBus EEPROM and dual-status LEDs.
The adapter follows the SFF-9402 Rev 1.1 pin-out and complies with the NVM Express 1.3a specification over a PCIe Gen 4 link. This single specification determines whether the host backplane and the target M.2 SSD can operate at Gen 4 speeds without signal degradation. Buyers whose platforms only support PCIe 3.0 or earlier will not gain Gen 4 performance from this part.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
The integrated hot-plug power protection IC is a solid-state component with no moving parts and does not require scheduled replacement.
The on-board 3.3 V hot-swap controller supports a maximum continuous current of 6.5 A for M.2 SSD protection.
The synchronous buck converter includes thermal shutdown protection; under sustained load the green LED shows power ready while the red LED blinks to indicate active status.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?