Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts two SlimSAS 8i ports to four Gen-Z 1C ports with 12 V hot-plug power, eFuse protection and Broadcom 95xx tri-mode support
This adapter connects Broadcom 95xx PCIe 4.0 MegaRAID and HBA Tri-Mode storage controllers to Gen-Z 1C devices using two SlimSAS 8i ports. It is built for integrators and system builders who need to bridge these specific controller families with Gen-Z 1C storage enclosures or backplanes. The card converts the SFF-8654 interface to four Gen-Z 1C ports in a single bracket.
Each of the four Gen-Z 1C connectors includes dedicated 12 V hot-plug power circuitry with eFuse protection and a programmable 6.5 A current limit. An SMBus hot-swappable two-wire buffer manages side-band signals such as CLKREQ#, WAKE#, PWRBRK#, PWRDIS and SMBRST#. Green LEDs show power-ready status while red LEDs blink to indicate active links, giving immediate visual feedback during drive swaps.
Confirm the host adapter is a Broadcom 95xx series Tri-Mode card that supports the required BP_TYPE and CPRSNT pull-up and pull-down configurations defined by SFF-9402 Rev 1.1. Ensure the target backplane or enclosure uses Gen-Z 1C connectors compatible with the adapter's pin-out and that the chassis can supply 12 V power to the card's onboard hot-plug circuitry.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
The adapter is compliant with the PCI Express Base Specification Rev 4.0, so each SlimSAS 8i link operates at Gen 4.0 speeds, capping throughput at the PCIe 4.0 lane rate.
It requires two SFF-8654 8i SlimSAS receptacles and four Gen-Z 1C ports, occupying a standard PCIe add-in card bracket; no extra drive-bay or backplane cut-outs are mentioned.
Seat the card in a PCIe 4.0 slot, attach the two SlimSAS 8i cables to the Broadcom 95xx MegaRAID or HBA Tri-Mode adapter, then connect Gen-Z 1C devices; the step most often missed is enabling the CPRSNTA# and CPRSNTB# pull-low signals so the Broadcom controller detects the link.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?