Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts SlimSAS 8i to PCI Express 4.0 with a built-in ReDriver extending 8 lanes at 16 GT/s
This Innocard adapter converts a PCIe x8 Gen 4 slot to a SlimSAS 8i connector using a built-in ReDriver. It is designed for Intel Ice Lake server platforms that need to extend 16GT/s signals over longer traces or cables. The board includes a clock buffer and multiple bus buffer gates for signal integrity.
The integrated PCIe ReDriver regenerates 16GT/s differential pairs across eight lanes to counteract attenuation on long traces. A 100MHz clock buffer drives the reference clock further, while dedicated buffers for PERST#, WAKE#, CLKREQ#, and PWRBRK# maintain sideband control over the same extended reach. This architecture keeps the link stable under continuous load rather than only during brief bursts.
The SFF-8654 connector follows the SFF-9402 Rev 1.1 pin-out, which defines the electrical and mechanical limits of the 8i interface. Cable length and trace routing must stay within the margins that the ReDriver and buffer gates can compensate for. Exceeding those margins will degrade the 4.0 link even with the onboard signal conditioning.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
The built-in PCIe ReDriver extends Gen 4 16 GT/s signals across eight lanes, while the 100 MHz clock buffer and PERST#, WAKE#, CLKREQ# and PWRBRK# repeaters maintain clean timing over long traces and cables during all-day operation.
The adapter plugs into a PCIe x8 Gen 4 slot and presents an SFF-8654 8i connector with pin-out per SFF-9402 Rev 1.1, so a matching SlimSAS 8i cable is needed to complete the link.
The card is designed for PCIe 4.0 16 GT/s operation; the D1 green LED shows AIC ready status when the link is up, but Gen 3 slot compatibility is not covered in the specifications.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?