Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a SlimSAS 4i SFF-8654 connection to an M.2 NVMe 22x110mm slot with PCIe Gen4 support and built-in power protection including overcurrent, undervoltage and thermal shutdown safeguards
This gender changer converts a SlimSAS 4i (SFF-8654) interface to an M.2 NVMe 22x110mm slot. It enables connection of an NVMe solid-state drive to a system or backplane equipped with the SFF-8654 connector. The adapter suits integrators adding high-speed storage to compatible server or workstation platforms. It is not for users needing a direct PCIe card edge or U.2 connection.
Built to the SFF-9402 Rev 1.1 pin-out, the board includes a PCIe 2x3 auxiliary power connector accepting 12 V at 6.5 A maximum input. An on-board 12 V to 3.3 V PWM buck converter delivers up to 5.5 A to the drive. A 3.3 V hotswap controller with programmable inrush slew rate supports hot-plug insertion. TVS diodes rated at 400 W, a 30 V NexFET MOSFET and a Schottky barrier rectifier protect the 3.3 V rails. The design omits a bracket, so mechanical retention depends on the host connector and drive screw.
Overcurrent, under-voltage and over-voltage protection circuits guard the M.2 device during power transitions. Thermal shutdown activates if converter temperature exceeds safe limits. ESD human-body-model protection is rated to 500 V. Sideband signals including PERST#, CLKREQ#, WAKE# and PWRDIS are level-shifted between 3.3 V and 1.8 V as required. These features maintain signal integrity and drive safety under normal thermal and electrical loads.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
The changer is specified for PCIe Gen4 operation over the SFF-8654 connector.
It accepts a 22x110mm M.2 NVMe module and needs a PCIe 2x3 auxiliary power connector for 12V input up to 6.5A.
Insert the M.2 SSD, secure it with the standoff screw, connect the SlimSAS 4i cable, then attach the 2x3 power plug; the power plug is the step most often forgotten.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?