Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts U.2 PCIe 4.0 to Gen-Z 1C with 12 V hot-plug power protection and status LEDs
This adapter connects a Gen-Z 1C EDSFF solid-state drive to a U.2 PCIe 4.0 host interface. It is intended for system integrators and datacentre technicians who need to validate or deploy EDSFF storage in existing U.3 backplanes without redesigning the chassis.
A built-in 12 V hot-plug power IC with eFuse protection manages insertion and removal under load. The board forwards SMB_CLK, SMB_DATA, PWRDIS and DualPortEn signals, while four status LEDs report 12 V power ready, Gen-Z SSD activity, PRSNT0# presence and 3.3 Vaux readiness. If the host does not supply 3.3 Vaux, the JP1 header must be configured on the adapter itself.
The design consolidates U.3 SFF-8639 male and EDSFF 1C connectors onto a single PCB that meets NVM Express 1.2, PCIe 4.0, SFF-TA-1001 Rev1.1, SFF-TA-1002 Rev1.3, SFF-TA-1006 Rev1.4 and Gen-Z Scalable Connector Rev1.1 specifications. The jump is worthwhile when a standardised, compliant hot-plug path is required instead of a one-off mechanical shim or an unqualified converter.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | EDSFF |
This adapter is built specifically for Gen-Z 1C EDSFF SSDs and provides a U.3 SFF-8639 male connector on the host side.
It supports PCI Express Base Specification Rev 4.0, so the link can run at Gen 4 speeds provided the host, SSD and cabling all meet the same revision.
It complies with SFF-8639 Rev 3.0, SFF-TA-1001 Rev 1.1, SFF-TA-1002 Rev 1.3, SFF-TA-1006 Rev 1.4 and Gen-Z Scalable Connector Rev 1.1, capping the mechanical, electrical and pin-out requirements to those revisions.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?