Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts U.2 and SlimSAS 4i drives to dual PCIe x4 slots with hot-swap SMBus and eFuse protection at Gen4 speeds
This gender changer converts SlimSAS 4i and U.2 connectors to two PCIe x4 slots for Gen4 signalling at 16GT/s. It suits technicians and system integrators who need to attach SFF-8654 or SFF-8639 storage devices to a standard PCIe backplane. The board is designed and made in Taiwan and carries part number GD0804A.
Each PCIe slot receives +12 V through an eFuse with a programmable 6.5 A current limit and controlled inrush slew rate. On-board PWM and LDO buck converters generate 3.3 V rails up to 4 A with over-current, under-voltage and UVLO safeguards. Thermal shutdown and 2 kV HBM ESD protection guard both power domains during insertion and removal.
One card handles both SFF-8654 4i and SFF-8639 pin-outs defined by SFF-9402 Rev 1.1, removing the need for two distinct adapters. Built-in SMBus hot-swap buffers and Broadcom 95xx Tri-Mode sideband support (BP_TYPEA/B pull-ups, CPRSNT pull-downs) let MegaRAID and HBA controllers manage presence detect without extra cabling. The jump is worthwhile when a single Gen4 x4 slot must serve mixed drive form factors.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
Plug each connector into its matching PCIe x4 slot, then attach the SMBus hot-swap buffer cable; the step often missed is enabling the BP_TYPE pull-up resistors for Broadcom 95xx Tri-Mode adapters.
The eFuse protecting the +12 V rail and the 3.3 V load switches are the only active protection parts; if a sustained over-current or thermal event trips them, the board must be replaced.
The programmable 6.5 A current limit on the +12 V hot-plug circuit is the first ceiling reached during continuous high-speed operation.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?