Intel E610-XT2 10GbE Dual-Port PCIe 4.0 x4 Adapter
Dual-port 10 GbE adapter with PCIe 4.0 x4 and multi-speed RJ45 support for 10G, 2.5G, 5G and 1G networks
- Dual 10GbE ports deliver high throughput
- PCIe 4.0 x4 provides ample bandwidth
- Auto-negotiation supports 100, 2.5, 5 and 10 GbE speeds
- Hardware Root of Trust strengthens network security
- Backward-compatible RJ45 eases 1GbE migration
Dual 10GbE PCIe 4.0 adapter for server upgrades
The Intel E610-XT2 adds two 10GBase-T ports over a PCI Express 4.0 x4 slot. It targets administrators moving 1 GbE infrastructure to 10 GbE without changing cabling. The Intel Ethernet 600 Series controller includes hardware Root of Trust for platform security.
Standard half-height plug-in card
Installation follows normal PCIe add-in procedure; the bracket fits common server chassis. Auto-negotiation across 10GBase-T, 5GBase-T, 2.5GBase-T, 1000Base-T and 100Base-TX reduces manual configuration errors. The only common issue is seating the x4 connector fully in a busy backplane.
Verify slot generation.
Confirm the host provides a PCIe 4.0 x4 or wider slot; older generations will limit throughput. Ensure twisted-pair cabling is rated for the desired speed — Cat6a or better for 10G. Check that your operating system includes or can load the Intel E610 driver before deployment.
How it compares
Measured against everything we stock in Interface & Card Adapters, at today’s prices. Recalculated every night.
- Price $252.99
- Pricier than about 92% of the 353 comparable items (median $21.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Intel |
Questions about this item
How can I verify the Intel E610-XT2 adapter is operating at 10 Gbit/s after installation?
Check the link speed in your OS network settings or switch management console; it should show 10 Gbit/s when connected to a 10GBase-T port with Cat6a or better cabling.
What cables or modules must I buy separately to use both ports on the E610-XT2?
The adapter uses RJ45 twisted-pair ports; you need Cat6a or higher Ethernet cables for each 10GBase-T link — no SFP+ modules or DACs are used.
Should I choose the E610-XT2 dual-port or the E610-XT4 quad-port version for my server?
Choose the E610-XT2 when you need two 10GBase-T connections; select the E610-XT4 only if your chassis and workload require four ports.
More in Interface & Card Adapters





