isptewhie SATA Cable III 3 Pack 6Gbps 40cm Blue
Three SATA III cables with locking latches provide 6 Gbps links for hard drives and optical drives at 40 cm length
- Product colorBlue
- Fast 1 GB transfer in just 5 seconds
- Three cables included for RAID or spare drives
- Connects motherboards to SATA hard drives and DVD drives
- 6 Gbps SATA 3.0 speed with backward compatibility
- Locking latches on both ends for secure connections
Three-Pack SATA III Cables
This set contains three SATA III cables, each 40 cm long, finished in blue with locking latches on both ends. They connect motherboards or host controllers to internal Serial SATA hard drives, SSDs and optical drives. The pack suits builders adding multiple drives or configuring RAID arrays.
6 Gbps Bandwidth and Backward Compliance
Each cable supports the SATA 3.0 specification for up to 6 Gbps throughput, roughly twice the ceiling of the previous revision. The link remains backward compatible with SATA I and SATA II devices, so older drives still function at their native rates. Real-world transfer of a 1 GB file completes in about 5 seconds on a 6 Gbps port.
Replaces Loose or Damaged Leads
These cables replace worn, missing or non-locking leads that can disconnect under vibration. The locking latch secures each endpoint, preventing accidental unseating during drive swaps or case moves. The jump is worthwhile when current cables lack latches, show intermittent errors or limit a 6 Gbps drive to a slower link.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 63% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Blue |
Questions about this item
Will the 6 Gbps SATA 3.0 cables work with my older SATA I and SATA II drives?
Yes, the cables are backwards compatible with SATA I and SATA II, so they will connect and function with older drives at the speed those drives support.
How can I verify the cables are running at the full 6 Gbps speed after installation?
Check your system BIOS or operating system drive properties to confirm the negotiated link speed shows 6 Gbps (SATA 3.0) for each connected drive.
Does the 3-pack include only the three blue data cables, or are power cables and mounting screws also supplied?
The pack contains three 40 cm blue SATA data cables with locking latches; power cables and mounting hardware are not included and must be sourced separately.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATRD30CM 30cm SATA cable latching 6Gbps
- 11.81 in (30 cm)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Transway's Marketplace DT-5025D USB 2.0 to SATA 2.5" cable .5 ft
- Usb2.0 to sata and…
- Clear Blue
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





