Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Internal breakout cable links an SFF-8087 controller to four SATA drives at 6 Gb/s each
This new JacobsParts cable connects a RAID or PCIe controller equipped with an internal SFF-8087 port to four SATA drives. It uses a 32-pin Mini SAS connector that fans out to four 7-pin SATA connectors over a 3.3 ft length. The assembly supports up to 6Gb/s per drive and uses slim ribbon cables wrapped in woven mesh sheathing.
Builders adding multiple SATA disks to a host bus adapter with an SFF-8087 interface will find the forward breakout layout convenient. Low-profile SATA plugs with steel latches resist vibration disconnects. It is not for systems lacking an internal SFF-8087 port, for external drive enclosures, or for connecting SAS drives directly.
The single specification that decides fit is the connector pairing: a 32-pin internal Mini SAS plug on one end and four standard SATA 7-pin receptacles on the other. If the controller presents a different port style or the drives require a different interface, this cable will not work.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | SATA III |
| Product color | Aqua Blue |
| Design style | SAS32PIN-4XSATA7PIN |
| Ports & slots | |
| Connector count | 4 |
| Size & build | |
| Overall length | 3.3 ft (1.01 m) |
The stainless-steel latches on each low-profile SATA plug resist vibration disconnects, and the acetate cloth tape over the ribbon cables provides strain relief; no scheduled connector replacement is required.
Each drive is limited to 6 Gb/s, so the combined ceiling is the PCIe 2.0 x8 host lane bandwidth shared across the four lanes.
The slim ribbon cables and half-length woven mesh sheath are designed to minimise airflow impact while routing between controller and drives.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?