Jansicotek L06B2IN1 2in1 USB-C USB 3.0 to 2.5 SATA cable
Connects 2.5" SATA SSD or HDD to USB-A or USB-C ports at up to 5 Gbps with UASP support
- Adapter typeUSB to SATA
- DetailsSupports Standard Notebook 2.5 in SATA and SATA II Hard driv
- Key featuresQuick Access to SATA SSD/HDD: USB to SATA 3.0/usb-c adapter
- In the box2in1 USB-C/USB 3.0 to SSD/2.5 in SATA Adapter Cable X 1
- Connect 2.5" SATA SSD or HDD to USB-A or USB-C devices
- Transfer data at up to 5 Gbps over USB 3.0
- Works with USB 2.0 at 480 Mbps and USB 1.1
- Hot-swappable, plug-and-play with no drivers required
- Compact 7.9-inch cable with ASM1153E chipset for broad compatibility
2-in-1 USB-C and USB 3.0 SATA adapter
The Jansicotek L06B2IN1 connects a 2.5 inch SATA SSD or HDD to computers with USB-A or USB-C ports. It suits users who need quick access to bare drives for data recovery, backups or system upgrades. The adapter works with standard notebook drives and requires no external power supply.
Dual connectors and hot-swap convenience
A short 7.9 inch cable carries both a USB 3.0 Type-A plug and a USB-C plug for enhanced power delivery. The 22-pin SATA connector mates directly with the drive, enabling hot-swappable, driver-free operation on Windows, macOS, Linux and Chrome OS. The design omits support for 3.5 inch or 5.25 inch drives because they need 12 V power.
Low-power operation with UASP acceleration
The ASM1153E chipset delivers up to 5 Gbps over USB 3.0 and 480 Mbps over USB 2.0, with UASP boosting real-world throughput by up to 70 percent. Bus-powered from the host port, the adapter draws only 5 V and stays cool during extended transfers. No fan or heatsink is required.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 75% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | L06B2IN1 |
| Adapter type | USB to SATA |
| In the box | |
| In the box | 2in1 USB-C/USB 3.0 to SSD/2.5 in SATA Adapter Cable X 1 |
Questions about this item
What transfer rate does the USB 3.0 interface actually cap at?
The adapter reaches up to 5 Gbps on a USB 3.0 port and falls back to 480 Mbps on USB 2.0.
Which drive sizes and connectors does the 22-pin SATA end accept?
It fits standard 2.5 inch SATA and SATA II hard drives or SSDs; 3.5 inch drives are not supported.
How is the adapter installed and what step is often missed?
Plug the SATA connector into the 2.5 inch drive, then insert the USB-A or USB-C plug into the computer — no drivers or external power cable are required.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
NEON Drive IEEE 1394 Firewire cable 4-pin to 9-pin 300cm 10-ft
- IEEE 1394(Firewire)
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





