Jansicotek SATA Cable III 90 Degree 3 Pack 6Gbps Straight to Right 18 Inch Locking Latch
Three SATA III cables with 90-degree and straight locking connectors support 6 Gbps data transfer for drives and optical devices
- Product colorBlack
- 6 Gbps data rate from SATA 3.0 spec
- 90-degree right-angle connector saves space in tight cases
- Locking latch on each end prevents accidental disconnects
- 18-inch length fits standard drive-to-motherboard runs
- Three cables in one pack gives spares for RAID or upgrades
Three-pack SATA III data cables
This three-pack supplies straight-to-right-angle SATA III cables for connecting internal hard drives, SSDs and optical drives to motherboards or host controllers. Each cable measures 18 inches and carries a locking latch on both ends for a secure fit. The pack suits builders adding multiple drives or keeping spares for quick replacements.
6 Gbps bandwidth with legacy support
Rated for SATA revision 3.0, the cables handle up to 6 Gbps while remaining compatible with older SATA I and II devices. Actual throughput depends on the connected drive and controller, so very fast SSDs may hit the interface ceiling. The 90-degree connector eases routing in tight chassis, but the fixed length limits reach in larger cases.
Locking latches and three-unit value
Every cable ends in a latch that resists vibration and accidental unplugging during transport or upgrades. The three-pack format lowers per-cable cost and provides immediate spares for RAID arrays or multi-drive setups. No power conductors are included, so a separate SATA power cable from the PSU remains necessary.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 75% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Questions about this item
Will these 6 Gbps cables run at full speed with my older SATA I and SATA II drives?
Yes, the SATA Revision 3.0 cables are backwards compatible with SATA I and SATA II drives, though the actual transfer rate will be limited by the drive's own rating.
How can I verify the locking latch is engaged after I plug the cable into my motherboard and SSD?
Push each connector until you feel a distinct click; the latch will then resist a gentle pull, confirming a secure connection that resists vibration.
The pack contains three 18 inch straight-to-right-angle data cables — do I need to buy separate power cables for my drives?
Yes, these are data-only cables; each drive still requires a separate SATA power connection from your power supply.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
NEON Drive IEEE 1394 Firewire cable 4-pin to 9-pin 300cm 10-ft
- IEEE 1394(Firewire)
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





