JIMTAB Cable-1001 3-Pack 90 Degree Right Angle SATA Cable 18 Inches 6.0 Gbps Black
Three right-angle SATA III cables connect drives in tight spaces at up to 6.0 Gbps
- Product typeSATA III
- Key features90 Degree Right, SATA 3.0
- 6 Gbps data transfer for fast file access
- 90 degree angled connector fits tight case spaces
- 3-pack provides spare cables for multiple drives
- 18 inch length suits standard chassis layouts
- Hot-swappable design allows drive changes without shutdown
Right-Angle SATA III Cable Pack
The JIMTAB Cable-1001 three-pack supplies 18-inch SATA III cables with 90-degree right-angle connectors for linking internal drives to a motherboard. Each cable supports data rates up to 6.0 Gbps and remains backward compatible with 1.5 Gbps and 3.0 Gbps devices. The flat, low-profile jacket reduces clutter and eases routing in tight cases. A latching design secures the connection against accidental dislodgement.
Builders With Cramped Cases
These right-angle cables suit builders who need to route SATA connections behind drive cages or in shallow chassis where straight plugs would press against panels. The 90-degree orientation prevents cable stress and connector damage in confined spaces. Users who prefer straight-through connectors for open layouts or external eSATA brackets will not benefit from the angled design. The pack also assumes internal SATA ports are available on the host board.
Three Cables For Multiple Drives
The pack provides three cables, allowing simultaneous connection of up to three SATA devices such as SSDs, hard drives or optical units. Each 18-inch length reaches typical motherboard-to-drive distances without excess slack. Runs that span full-tower heights or require routing around large coolers may exceed the available length. Hot-plug support lets you swap drives without powering down the system.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 75% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | JIMTAB |
| Model name | Cable-1001 |
| Product type | SATA III |
Questions about this item
What motherboard header do I need to plug the 90-degree SATA III cable into?
The cable uses a standard 7-pin SATA data connector that fits any motherboard SATA port, including those labelled 6.0 Gbps or 3.0 Gbps.
Will the 6.0 Gbps SATA cable work with my older 1.5 Gbps hard drive?
Yes, the SATA III cable is backward compatible with SATA I at 1.5 Gbps and SATA II at 3.0 Gbps, so the older drive will function at its native speed.
How can I verify the 18-inch cable is delivering 6.0 Gbps after installation?
Check the negotiated link speed in BIOS or your operating system storage utility; it should report 6.0 Gbps when connected to a SATA III drive and port.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
NEON Drive IEEE 1394 Firewire cable 4-pin to 9-pin 300cm 10-ft
- IEEE 1394(Firewire)
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





