Laintek 2 Port SATA to eSATA Adapter Bracket Blue 20 in
Converts two internal SATA ports into two external eSATA ports using a 20-inch blue bracket cable supporting 3Gbit/sec speeds
- Cable length1.66 ft (0.51 m)
- Connector count2
- Product typeSATA
- Product colorBlue
- Overall length20 in (50.8 cm)
- Converts two internal SATA ports to external eSATA
- 20-inch cable length for flexible bracket placement
- Supports SATA II speeds up to 3Gbit/sec
- Blue colour aids quick cable identification
- Two connectors enable dual-drive external connection
Two-Port SATA to eSATA Adapter Bracket
This bracket converts two internal SATA ports on a motherboard into two external eSATA ports. It is built for users who need to connect external eSATA storage or docking stations to a desktop system. The blue cables measure 20 inches in length. It suits builders adding external drive access without opening the case.
SATA II Interface Limit
The adapter supports SATA II speeds up to 3Gbit/sec, so connected drives cannot exceed that throughput. It will not deliver the higher bandwidth of later SATA revisions. Users requiring 6Gbit/sec transfers should verify their drives and controller can operate within this limit. The cable length of 1.66 ft also restricts placement of external devices.
Dual eSATA Port Count
The bracket provides exactly two eSATA connectors, matching the two internal SATA headers it occupies. Systems with only one spare SATA header cannot use both external ports simultaneously. Builds needing more than two external eSATA connections will require additional brackets or a controller card.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 75% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | SATA |
| Product color | Blue |
| Ports & slots | |
| Connector count | 2 |
| Size & build | |
| Overall length | 20 in (50.8 cm) |
| Cable length | 1.66 ft (0.51 m) |
Questions about this item
Should I choose the 20-inch or 1.66-foot length for my case?
Both figures describe the same cable — 20 inches equals 1.66 feet — so the choice is simply the unit you prefer to measure with.
What does the 3Gbit/sec SATA II rating mean when the bracket is installed?
It caps each eSATA port at SATA II throughput, so connected drives will not exceed 3Gbit/sec even if the drive or controller is faster.
Does the bracket use a standard SATA or eSATA interface on the motherboard side?
It plugs into two internal SATA ports on the motherboard and presents two external eSATA ports on the bracket.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
NEON Drive IEEE 1394 Firewire cable 4-pin to 9-pin 300cm 10-ft
- IEEE 1394(Firewire)
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





