APC AP7723 Switched Rackmount PDU 20A 230V 8xC13 1xC19
- cUL Listed, EN 5502…
- Switched
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1U horizontal PDU with 10 NEMA 5-15R outlets, L5-30P input, network management via Telnet, SSH and SNMP, and a 17-inch cord for 125 V AC rack power distribution
The Liebert PM10-L30A is a 1U horizontal rackmount power distribution unit that provides ten NEMA 5-15R output receptacles. It is designed for IT environments that need managed AC power distribution from a single 125 V AC input. The unit integrates with Cyclades ACS console servers and Avocent DSView 3 software for combined system access and power control.
Confirm that your facility supplies 125 V AC and that the rack can accept a 17-inch wide horizontal unit with a 1.8-inch height profile. The input cord uses a NEMA L5-30P plug rated for 30 A and measures 17 inches in length. Ensure the rack depth accommodates the 8-inch unit depth and that outlet density matches the ten 5-15R receptacles.
The PDU connects to the network via an RJ-45 port and supports Telnet, SSH, and SNMP for remote monitoring and outlet control. It draws up to 30 A from one L5-30P source and distributes it across ten standard 5-15R outlets, freeing individual wall circuits for each device. The 8 lb unit mounts in a single 1U horizontal slot.
Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Avocent |
| Product type | Cyclades |
| Design style | Horizontal |
| Power | |
| Supply voltage | 125 V AC |
| Size & build | |
| Rack height | 1U |
| Cord length | 17 in (43.2 cm) |
The unit ships with a 17-inch NEMA L5-30P input cord and ten NEMA 5-15R outlets; you supply the rack screws and the devices that plug into the 5-15R receptacles.
This model is the single 30 A version rated for 125 V AC; select it when your branch circuit provides a NEMA L5-30P source and you need ten 5-15R outputs.
It allows a continuous load up to 30 A at 125 V across the ten outlets, with network management via Telnet, SSH and SNMP for remote monitoring.
More in Rackmount PDUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?