Tripp Lite B119-004-UHD 4-Port HDMI Switch 4K 60 Hz Remote
- 4-Port UHD
- HDMI Switchers
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Routes four HDMI sources to two displays at up to 4K 60 Hz and extracts audio via optical or 3.5 mm outputs
The LUOM OZJ1-1 connects four 4K sources to two displays and extracts audio through optical and 3.5 mm outputs. It supports HDMI 2.0b and HDCP 2.2 for protected content. Builders who need more than two outputs or who require HDMI 2.1 bandwidth cannot use this unit.
The matrix runs on a 5 V to 12 V supply and has no internal fans, so it adds no audible noise to the rack. Power draw stays low during normal switching of 4K@60 Hz signals. Installations that demand active cooling or redundant power supplies are not addressed by this design.
A handheld IR remote lets users assign any input to either output without reaching the chassis. Two optical and two 3.5 mm ports carry LPCM, Dolby and DTS 5.1 audio to external systems. EDID is set per Output A only, so setups requiring independent EDID per display will not work correctly.
Measured against everything we stock in HDMI & AV Selector Switches, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | LUOM |
| Product line | OZJ1-1 |
| Model name | OZJ1-1 |
| Part number | OZJ1-1 |
| Product type | HDMI Switchers |
| Adapter type | HDMI Switch/Extender |
| Product color | Black |
| Performance | |
| Bandwidth rating | 18.5 Gbit/s/600 MHz |
| Display | |
| Maximum supported resolutions | 4K@60 Hz |
| Audio & video | |
| Matrix switching | Yes |
| Sound | Yes |
| Ports & slots | |
| Port count | 4 |
| Input ports | 4 x HDMI |
| Output ports | 2 x HDMI |
| Size & build | |
| Max cable length | 10m AWG26 HDMI2.0b standard cable |
| Product dimensions | 5.91 × 2.36 × 0.79 in |
| Product weight | 11.9 oz |
| In the box | |
| Units per package | 1 |
| In the box | 1x HDMI Matrix 4 × 2 1x 5 V power adapter 1x IR Remote Control(Battery is not included) 1x User Manual |
Connect up to four HDMI sources to the inputs and two displays to the outputs, then set the EDID mode for Output A so both screens show the correct format. After changing the EDID setting, restart the matrix to apply it.
The unit has no user-serviceable parts. If the 5V-12V power adapter fails, replace it with one of the same voltage range. Keep the 10m AWG26 cables within spec to avoid signal loss.
The 18.5Gbps bandwidth ceiling is reached at 4K@60Hz RGB 4:4:4. Pushing deeper colour or higher refresh would exceed the 600MHz TMDS clock, so the matrix will downscale or drop frames first.
More in HDMI & AV Selector Switches
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?