Manw 3 Pack 10 Inch 15Pin SATA Power Extension Cables
Three 10-inch male-to-female SATA power extensions lengthen PSU cables for drives and fans in full-tower builds
- Extends PSU reach with 10-inch male-to-female design
- Three-pack covers multiple drives and fans in one kit
- High-purity copper maintains stable 5V/12V delivery
- Black jacket resists abrasion and keeps wiring tidy
- Plug-and-play fit for all standard 15Pin SATA hardware
Three-Cable Kit for Internal Power Reach
This Manw three-pack adds 10-inch SATA power extensions to any desktop build. Each cord carries a 15Pin male plug and matching female port so stock PSU leads reach drives or fans mounted far from the power supply. High-purity copper conductors keep 5V and 12V rails stable under continuous load. The uniform black jacket keeps routing tidy in full-tower chassis.
Replaces Short Stock Leads in Large Cases
The extensions solve the common problem of factory cables that fall short in extended-height enclosures or behind drive cages. Builders adding extra SSDs, HDDs or supplementary cooling fans gain the slack they need without splicing or adapters. The jump is worthwhile whenever the original harness cannot reach the target device cleanly. No driver install or BIOS change is required.
Plug-and-Play Fit for Standard 15Pin Gear
Every cable mates with any standard 15Pin SATA power receptacle on drives, hubs or PWM fan controllers. The male end seats directly into the PSU modular port or existing extension, while the female end accepts the device connector. This frees up routing space behind motherboard trays and eliminates tension on fragile stock wires. The kit works with any ATX power supply that provides native SATA power outputs.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 80% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Manw |
Questions about this item
How much clearance do the 15Pin SATA male and female connectors need behind a drive cage?
Each connector is a standard low-profile SATA power plug; allow roughly the depth of the plug body plus the cable bend radius when routing behind a drive cage or fan frame.
Which step do builders often skip when plugging these 10-inch extensions into a modular PSU?
They forget to seat the male 15Pin plug fully into the PSU's SATA power port until the latch clicks, leaving the connection loose and causing intermittent power.
When should the black outer jacket be inspected for wear on a continuously running system?
Check the jacket during any major hardware change or at least once a year; replace a cable if the sheath shows cuts, hardening or exposed copper near the 15Pin ends.
More in SATA & eSATA Drive Cables
Similar items
Micro Connectors SATA cable 40 inches straight to right angle locking latch black 3 pack
- Black
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 23" 1-to-4 15-Pin SATA Power Splitter Cable
- SATA
- Black
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors 0.5 m SATA III Right Angle to Right Angle Data Cable 3-Pack Red
- Red





