Manw M.2 NGFF to SATA 3 Adapter Card 2230 2242 2260 2280
Converts SATA M.2 SSDs (2230-2280) to standard SATA III for desktop or laptop storage expansion
- Converts M.2 SATA SSD to standard SATA III port at 6Gbps
- Supports B-key and B+M key SATA M.2 drives only, not NVMe
- Fits M.2 lengths 2230, 2242, 2260 and 2280
- Driver-free plug and play on Windows, Mac and Linux
- Compact add-in board for desktop or laptop storage expansion
M.2 SATA Adapter for 2230-2280 Drives
This adapter converts a SATA-bus M.2 slot into a standard SATA III interface running at up to 6Gbps. It accepts B-key and B+M key M.2 SATA SSDs in 2230, 2242, 2260 and 2280 form factors. The compact add-on board works in desktops or laptops and requires no drivers for Windows, Mac or Linux systems.
Build Integration with Spare M.2 SSDs
The card plugs into a motherboard SATA port, letting you reuse an existing M.2 SATA drive as extra storage without occupying an M.2 slot. It needs a free SATA data connector and power from the PSU, freeing the M.2 socket for a potential NVMe boot drive. No additional cables or brackets are included in the specifications.
Suited for SATA M.2 Reuse, Not NVMe Builders
This suits users who have spare B-key or B+M key SATA M.2 SSDs and want to add them to a system with available SATA ports. It will not work with NVMe protocol M.2 drives, so builders needing to adapt PCIe-based M.2 storage should look elsewhere. Buyers without a free SATA header also cannot use this adapter.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 85% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Manw |
Questions about this item
What is the maximum data-transfer rate of the SATA III interface on this adapter?
The adapter provides a SATA III connection capped at 6 Gbps, so the drive will hit the standard SATA ceiling before any other bottleneck appears.
Does the board generate noticeable heat or require active cooling during continuous operation?
The adapter is a passive PCB with no onboard controller or power circuitry, so it runs at ambient temperature and adds no audible noise.
Which M.2 key types and drive protocols are compatible with this card?
Only B-key or B+M-key M.2 SATA SSDs in 2230, 2242, 2260 or 2280 lengths work; NVMe protocol drives are not supported.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12 Inches 15-pin SATA Male to Female Power Extension Cable
- 1 ft (0.3 m)
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III straight to right-angle cable 20" black 3-pack
- Black





