MIAOERJING
MIAOERJING LE USB 3.0 to SATA Adapter 2.5
Connects 2.5 inch SATA SSD or HDD to USB 3.0 at 5 Gbps with LED status
- Rated speed5 Gbit/s
- Connector genderMale-to-Male
- Conductor typeCopper
- Product typeUSB
- Product colorSATA to Type-A
- Add disk space to a laptop with 2.5" SATA drives
- Transfer data at up to 5 Gbps via USB 3.0
- Works with USB 3.0, 2.0 and 1.0 ports
- Runs on Windows Vista through 10 and Mac OS
- LED shows connection status at a glance
2.5-inch SATA to USB 3.0 Adapter
This adapter connects a 2.5-inch SATA hard drive or SSD to a USB Type-A port. It supports USB 3.0 speeds up to 5 Gbps and is backward compatible with USB 2.0 and 1.0. The cable works with Windows Vista, 7, 8, 10 and Mac OS. It is designed for users who need quick access to data on a bare 2.5-inch drive.
Build Integration and Limitations
The adapter draws power from the USB port, so no external power supply is needed for compatible drives. It frees up internal drive bays by letting you run a 2.5-inch SATA drive externally. The cable cannot power or connect a 3.5-inch hard drive, nor does it support ATA, IDE, mSATA or M.2 interfaces. Buyers who need to connect larger desktop drives or newer form factors must choose a different solution.
Sustained Transfer Behaviour
The copper conductor and USB 3.0 interface maintain the 5 Gbps link during extended copy operations. LED indicators show power and activity status so you can monitor the connection at a glance. The SATA III chip supports UASP for lower overhead on long transfers. Performance will vary with the attached drive’s own sustained write speed and the host controller’s capability.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 75% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | MIAOERJING |
| Model name | LE |
| Product type | USB |
| Product color | SATA to Type-A |
| Performance | |
| Rated speed | 5 Gbit/s |
| Ports & slots | |
| Connector gender | Male-to-Male |
| Size & build | |
| Conductor type | Copper |
Questions about this item
Will a 2.5″ SATA SSD that can read faster than 5 Gbps be bottlenecked by this adapter during long transfers?
Yes, the USB 3.0 link tops out at 5 Gbps, so any drive capable of higher sustained throughput will be limited by the adapter.
Does the cable get hot or draw enough power to need a fan when a 2.5″ SSD runs all day?
The adapter is bus-powered and has no active cooling; it stays cool under typical 2.5″ SSD workloads because those drives draw little power.
What must I already own to use this adapter with a 2.5″ SATA drive?
A USB Type-A port (USB 3.0, 2.0 or 1.0) on the host and a 2.5″ SATA HDD or SSD — no external power supply is required.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
NEON Drive IEEE 1394 Firewire cable 4-pin to 9-pin 300cm 10-ft
- IEEE 1394(Firewire)
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





