Micro Connectors F04-04ARGB-30 30cm 1-to-4 ARGB splitter cable
A 30 cm addressable-RGB splitter that connects four devices to one motherboard header and includes five male pins for easy installation
- Product colorBlack
- Connect four ARGB devices to one motherboard header
- 30 cm length fits compact builds cleanly
- Flexible PVC jacket eases routing in tight spaces
- Five male pins included for quick connector repairs
- Lightweight 0.10 lb cable adds minimal strain
30 cm ARGB 1-to-4 Splitter Cable
The Micro Connectors F04-04ARGB-30 splits a single motherboard 3-pin addressable RGB header into four connections. It lets builders run multiple LED strips or fans from one header without extra controllers. The 30 centimetre length suits compact cases and tidy routing. Male pins are included in the package for quick assembly.
Flexible PVC construction for tight routing
The cable uses a pliable PVC jacket that bends easily around drive cages and power-supply shrouds. Its lightweight build adds only 0.10 lbs to the harness, so cable management stays simple. No active components means zero power draw and no fan noise. The passive design keeps thermals unchanged inside the chassis.
Brass pins and black PVC jacket
Each lead terminates in a standard 3-pin ARGB connector with brass contacts for reliable signal transfer. The black finish blends with most internal colour schemes. Five loose male pins are supplied so users can repair or customise ends as needed. The 30 to 50 cm length range covers most motherboard-to-peripheral runs.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 95% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Micro Connectors |
| Product color | Black |
Questions about this item
How do I install the 1-to-4 ARGB splitter onto a 3-pin motherboard header?
Plug the single female end into the motherboard 3-pin ARGB header, then connect up to four ARGB devices to the four female branches; the included male pins are only needed if you must repair or customise a connector.
What maintenance or replacement will the splitter cable need later?
The PVC jacket and brass pins are passive parts with no moving components; inspect the cable occasionally for kinks or pin corrosion and replace the whole assembly if any connector becomes loose or discoloured.
What limit appears first when running four ARGB strips continuously from one header?
The motherboard header's current rating is the limiting factor; the splitter simply passes power and signal to all four branches, so total draw must stay within the header's specified maximum.
More in Internal PSU & Riser Cables
Similar items
Nippon Labs POW-S6800-6IN 6.1" Molex to 2 x SATA 15-pin internal power cable
- 6.1 in (15.5 cm)
- 1x Molex LP4 male
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Micro Connectors ATX 12V 4-Pin CPU Power Extension Cable 8 Inches
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…
Dimastech BT111 Black & Red Switch Cables 600mm 2-Pin I/O
- 1.97 ft (0.6 m)





