ModMyMods 24-Pin Triple PSU Adapter Cable 30cm Black MOD-0211
Connects three power supplies to one motherboard for simultaneous start-up using 24-pin connectors
- Cable length1 ft (0.3 m)
- Powers multiple PSUs from one motherboard signal
- 30 cm main cable reaches the primary PSU easily
- 30 cm jumper leads connect extra PSUs cleanly
- 24-pin connectors fit standard ATX motherboards
- Black sleeving keeps the build looking tidy
Power-on control for three PSUs
This adapter cable lets a single motherboard signal turn on up to three power supplies at once. The main 30 cm section plugs between the board and the primary PSU, while two extra 30 cm leads connect the additional units. It is built for systems that draw far more current than one supply can deliver.
Mining rigs and multi-GPU compute boxes
Builders running several high-wattage cards from separate PSUs will find the simultaneous start-up useful. Anyone assembling a standard desktop or a workstation with a single power supply gains nothing from this cable and should use a normal 24-pin extension instead.
Two extra 24-pin jumpers included
The bundled jumpers are the only parts that make multi-PSU power-on possible; without them each additional supply would need its own manual switch or paper-clip jumper. No software, drivers or extra connectors are supplied.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 95% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Cable length | 1 ft (0.3 m) |
Questions about this item
Do I need three separate power supplies to use the 24-pin triple adapter cable?
The 30 cm main portion connects the first PSU to the motherboard while each 30 cm lead plugs into an additional PSU, so two or three units can be used.
Will the 30 cm jumpers reach a second PSU mounted in a separate chamber of my case?
Each additional lead is 30 cm long, which typically spans the gap between a main chamber and a rear PSU bay in standard ATX cases.
How can I confirm the 24-pin triple cable is triggering all supplies at once?
When the motherboard powers on, every connected PSU should spin up simultaneously because the adapter passes the PS-ON signal through all 24-pin jumpers.
More in Internal PSU & Riser Cables
Similar items
Nippon Labs POW-S6800-6IN 6.1" Molex to 2 x SATA 15-pin internal power cable
- 6.1 in (15.5 cm)
- 1x Molex LP4 male
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Micro Connectors ATX 12V 4-Pin CPU Power Extension Cable 8 Inches
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…
Dimastech BT111 Black & Red Switch Cables 600mm 2-Pin I/O
- 1.97 ft (0.6 m)





