Monoprice 140373 SATA 6 Gbps straight cable with locking latch 10 inches black
Internal SATA cable with locking latches on both ends, 10 inches long and rated for 6 Gbps data transfer
- Rated speed3 Gbit/s
- Connector detailsSata
- Connector genderMale-to-Male
- Conductor typeCopper
- Product typeSATA
- Product colorBlack
- Certified for 6 Gbps with SATA 6 Gbps devices
- Locking latches on both ends prevent accidental disconnection
- 10 inch length keeps internal cable runs tidy
- Backwards compatible with SATA 3 Gbps and 1.5 Gbps hardware
- Copper conductors deliver reliable data transfer
SATA 6 Gbps cable with locking latch
The Monoprice 140373 is a 10 inch internal SATA cable rated for 6 Gbps speeds. It connects SSDs, hard drives or optical drives to a motherboard or controller. The male-to-male copper conductors support backwards compatibility with 3 Gbps and 1.5 Gbps devices. This cable suits builders who need a short, secure link inside a compact case.
Straight connectors and latch installation
Each end has a straight connector with an attached locking latch that clicks into the port. Push the plug straight in until the latch engages; do not force it at an angle. The short .83 foot length leaves little slack, so route the cable before seating both ends. The latch prevents disconnection from vibration but requires a deliberate squeeze to release.
6 Gbps certified transfer rate
The cable is certified for SATA 6 Gbps performance when paired with matching drives and controllers. Actual throughput will not exceed the slowest device in the chain. If your drive or controller only supports 1.5 Gbps or 3 Gbps, the link will run at that lower speed. Buyers needing longer reach or right-angle connectors should choose a different cable.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Monoprice |
| Model name | 140373 |
| Product type | SATA |
| Product color | Black |
| Performance | |
| Rated speed | 3 Gbit/s |
| Ports & slots | |
| Connector details | Sata |
| Connector gender | Male-to-Male |
| Size & build | |
| Conductor type | Copper |
Questions about this item
How do I confirm the cable is delivering 6 Gbps after connecting my SSD?
Verify in your BIOS or operating system that the drive negotiates a SATA 6 Gbps link speed; the cable supports up to 6 Gbps with compatible devices and controllers.
What comes in the box and do I need any extra parts?
The package includes one 10-inch Monoprice 140373 SATA cable with locking latches on both ends; no additional components are required for a standard drive connection.
Should I choose this 10-inch cable or a different length for my build?
Select the 10-inch version when the drive and motherboard ports are close together; longer cables are only needed for larger cases or distant port placements.
More in SATA & eSATA Drive Cables
Similar items
STARTECH PYO2LP4SATA 12in LP4 to 2 SATA power splitter cable
- 1 ft (0.3 m)
- Others
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Aoiutrn JMH-01 SATA Cable III 4 Pack 90 Degree Right Angle Straight 50cm 6Gbps 3.0
- Auxiliary
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





