Monoprice 140411 SATA cable 18in Blue 10-pack locking latch
Ten 18-inch blue SATA cables with locking latches support 6 Gbps data transfer
- Cable length1.5 ft (0.46 m)
- Connector count2
- Product typeOthers
- Product colorBlue
- Overall length0.4572
- Key featuresSATA Revision 3.0 allows for data transfer speeds of up to 6
- SATA 3.0 spec supports up to 6 Gbps transfer speeds
- Locking latch on each connector prevents accidental disconnection
- 18 inch length suits typical internal drive layouts
- Blue colour coding simplifies cable identification
- 10-pack provides spares for multiple builds or replacements
SATA III 6 Gbps cable pack
This pack contains ten straight SATA III cables, each 18 inches long and coloured blue. They are rated for data transfer speeds up to 6 Gbps when paired with matching drives and controllers. The locking latch on every connector prevents accidental disconnection from vibration or cable routing. Each cable measures 1.5 feet end to end.
Upgrade from SATA 1.5 Gbps or 3 Gbps cables
Replacing older SATA cables with these 6 Gbps certified versions removes a bottleneck when the drive and controller both support the faster revision. The improvement is only realised if every link in the chain runs at SATA 3.0; a slower drive or port will limit the subsystem to its own maximum rate. Builders still using first- or second-revision cables on modern SSDs or hard drives will see the benefit.
Sustained transfer stability
The tighter tolerances and higher-quality materials required for 6 Gbps signalling keep the link stable during long copy or backup operations. Locking latches maintain firm contact so sustained throughput does not degrade from connector creep. Backwards compatibility ensures the same cables work reliably with legacy 1.5 Gbps and 3 Gbps devices at their native speeds.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Pricier than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Monoprice |
| Model name | 140411 |
| Product type | Others |
| Product color | Blue |
| Ports & slots | |
| Connector count | 2 |
| Size & build | |
| Cable length | 1.5 ft (0.46 m) |
Questions about this item
What clearance is needed for the straight locking-latch connectors on the 18in cables?
Each straight connector with its attached locking latch needs enough room behind the drive or motherboard port for the latch to click into place; the cable itself is 18in long.
How do you seat the locking latch correctly so it does not pop off?
Push the straight connector straight into the SATA port until the metal latch clicks audibly; angling the plug prevents the latch from engaging.
When should a cable from the 10-pack be replaced?
Replace any cable if the latch no longer clicks, the connector feels loose, or intermittent drive errors appear after vibration or case movement.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
BENFEI 000306black-6p SATA cable 6 pack 18 inch 90 degree locking latch black
- Male-to-Male
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Cable Matters 104008-24x3 3-Pack 90° SATA Cable 24in Red
- Sata
- SATA





