Monoprice 140414 SATA 6Gbps cable 1.5 ft red 10 pack
Ten SATA 6 Gbps cables with locking straight connectors, 1.5 ft each, for internal drives
- Cable length1.5 ft (0.46 m)
- Connector count2
- Product typeOthers
- Overall length0.4572
- Key featuresData transfer speeds of up to 6 Gbit/s.
- 6 Gbps certified speed for fast data transfers
- Locking latches keep connections secure during vibration
- 5 ft red cables simplify tight internal routing
- Ten cables in one pack cover multiple drives
- Backwards compatible with SATA 3 Gbps and 1.5 Gbps devices
SATA 6 Gbps cable pack
This ten pack supplies 1.5 ft red cables rated for SATA 6 Gbps data transfer. Each cable carries two straight connectors with attached locking latches. The set suits builders wiring multiple drives in a compact chassis.
Sustained throughput behaviour
The cables meet SATA revision 3.0 tolerances so the 6 Gbps link remains stable during long copy or backup sessions. Backward compatibility means the same leads work with 3 Gbps and 1.5 Gbps devices at the speed of the slowest component.
Locking latch reliability
Moulded latches click onto drive and motherboard ports to resist vibration from fans or drive motors. Straight connectors keep the cable run tidy in tight drive cages. The 1.5 ft length reduces slack without straining the latch mechanism.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Monoprice |
| Model name | 140414 |
| Product type | Others |
| Ports & slots | |
| Connector count | 2 |
| Size & build | |
| Cable length | 1.5 ft (0.46 m) |
Questions about this item
Does the 1.5 ft length affect heat or power draw when the cable runs continuously?
Cable length of 1.5 ft does not change heat or power draw; the conductors carry only the signalling current required by the SATA 6 Gbps specification.
What connectors must already exist on my drives and motherboard for these cables to work?
Each cable has two straight SATA connectors with locking latches, so you need standard SATA data ports on both the host controller and the drive.
Will these cables slow down an older SATA 3 Gbps drive I plan to keep?
The cables are backwards compatible; when paired with a SATA 3 Gbps drive the subsystem simply runs at 3 Gbps instead of 6 Gbps.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
COMeap SATA power cable 6 pin to 3×15 pin 20 in 50 cm
- 6 Pin, Sata 15 Pin
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
ADCAUDX DC-0048 SATA cable 1.6 ft 5-pack
- Sata to Sata 7 Pin
- SATA Cables





