Shenzhen Aimilai Technology Co.Ltd. M.2 NVMe to PCIe x4 Adapter with Heatsink Gold Aluminum Black
- Gold
- Aluminum, Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
High-conductivity thermal pad rated at 12.8 W/mK measuring 85 by 45 by 1 mm bundled with sleeved 18AWG PSU extension cables including 24-pin ATX, 4+4-pin EPS.
This kit includes a high-conductivity thermal pad measuring 85 by 45 by 1 millimetres with a rating of 12.8 W/mK. It targets builders who need to bridge gaps between memory modules, voltage regulators or chipset heatsinks and their coolers. The pad is non-conductive, operates from minus 40 to 200 degrees Celsius and can be cut to fit specific layouts.
Factory pads often use lower-conductivity material that cannot move heat quickly enough from tightly packed components. The 12.8 W/mK rating and 3.1 g/cc density deliver a measurable improvement when the original interface is too thick or has dried out. The jump is worth it when temperatures on memory or VRM zones remain high despite adequate airflow.
The silicone rubber retains its elasticity and compression characteristics during prolonged heat soak, resisting pump-out and hardening. Density remains stable at 3.1 g/cc and hardness stays within 30 to 55 Shore C after repeated cycles. The bundled 18 AWG sleeved extensions — 24-pin ATX, 4+4-pin EPS, two 8-pin and two 6-pin PCIe at 30 centimetres — keep power delivery tidy without adding resistance that could affect long-term stability.
Measured against everything we stock in RAM & Chipset Heatsinks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | AT |
The pad is 1mm thick and can be cut to size, so it fills gaps up to 1mm between the component and heatsink.
Route each 30cm extension — 24-pin ATX, 4+4-pin EPS, two 8-pin and two 6-pin PCIe — then snap the included combs onto the cables to lock spacing and improve airflow.
The silicone pad is rated from -40 to 200 °C and resists drying out; replace only if it tears, loses compression or shows visible degradation during a rebuild.
More in RAM & Chipset Heatsinks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?