Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR3 1600 ECC registered server memory module, 2Rx4 1.20 V 240-pin RDIMM
This NEMIX RAM module is a 16 GB DDR3 1600 registered DIMM with ECC and a 2Rx4 organisation. It operates at 1.20 V and uses the standard 240-pin form factor for server and workstation platforms. The part number is MR12800-624K1 and the chips are sourced from major OEM suppliers such as Samsung, Micron or Hynix.
The stick suits administrators expanding a QNAP NAS or any server that requires registered ECC DDR3 memory at 1600 MT/s. It will not work in desktop boards that only accept unbuffered non-ECC modules, nor in systems limited to lower densities or different voltages. Buyers needing unbuffered DIMMs or higher speeds must select a different product.
Verify that your motherboard or NAS has a free 240-pin DDR3 slot that supports registered ECC modules at 1600 MT/s and 1.20 V. Confirm the maximum supported capacity per slot and the total population rules in the system manual before ordering. Ensure the platform accepts 2Rx4 rank configuration for stable operation.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | QNAP NAS Device Memory |
| Model name | QNAP NAS Memory |
| Part number | MR12800-624K1 |
| Total capacity | 16 GB |
| Product type | 240-Pin DDR3 RDIMM |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
Yes, this module is a 240-pin DDR3 RDIMM with ECC and registered buffering, so the motherboard must provide registered DDR3 slots that accept ECC memory.
The system will run all modules at the lowest common speed and voltage; mixing ranks is possible but may limit maximum capacity per channel depending on the motherboard.
Check the BIOS memory information or use a system utility such as CPU-Z to verify the reported speed, CAS latency, voltage and ECC status.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?