Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16GB DDR4 2666 ECC UDIMM module with CL19 latency and 1.2V operation for QNAP NAS upgrades
This 16GB DDR4-2666 ECC UDIMM module is built for QNAP NAS devices that require 288-pin unbuffered memory with error correction. It operates at 1.20V with CL19 latency and a 2Rx8 organisation. The stick uses major OEM chips from Samsung, Micron or Hynix and carries no heat spreader.
All modules are rigorously stress tested under load to ensure reliability during continuous operation in mission-critical environments. The ECC function detects and corrects single-bit errors on the fly, preventing silent data corruption during long file transfers, backups or virtualisation tasks. Unbuffered design keeps latency low for responsive NAS services.
Verify that your QNAP model accepts 16GB DDR4-2666 ECC UDIMM modules in a 2Rx8 configuration at 1.20V. Confirm the motherboard has a free 288-pin slot and supports unbuffered ECC memory rather than registered or non-ECC types. Check the maximum supported capacity per slot and total system limit in the owner's manual. Ensure the BIOS or firmware is current for proper memory training.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | QNAP NAS Device Memory |
| Model name | QNAP NAS Memory |
| Part number | ME21300-628K1 |
| Total capacity | 16 GB |
| Product type | 288-Pin DDR4 ECC UDIMM |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL19 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
The module operates at 1.20V without a heat spreader and has no moving parts, so it adds no audible noise and minimal thermal load.
The NAS needs DDR4 slots that accept 288-pin unbuffered ECC UDIMMs at 2666 MT/s and a memory controller capable of 2Rx8 organisation.
Yes, if the existing modules are also DDR4 2666 ECC unbuffered UDIMMs; matching speed, voltage and ECC type lets the system run in multi-channel mode.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?